Futaba Corporation RRC-T11 ユーザーズマニュアル
1M23N18503
1
User’s Guide for Starting RBT-1
Please read through this guide carefully first.
You’ll need a personal computer to operate this product. The operation manual is
written assuming that you can manage basic computer operation. However, please note
that we can’t answer questions concerning your personal computer and its operating
system.
written assuming that you can manage basic computer operation. However, please note
that we can’t answer questions concerning your personal computer and its operating
system.
What you need to provide separately
★
Personal computer
･
OS
Windows® XP
･
CPU
Pentium®3 with more than 800MHz
(Pentium®4 with more than 1.6GHz is recommended.)
(Pentium®4 with more than 1.6GHz is recommended.)
･
Main memory
256MB or more (more than 512MB recommended)
･
Video memory (VRAM) 8MB or more (more than 16MB recommended)
･
HDD available capacity 30MB or more
･
CD-ROM drive
Indispensable
･
RS232C port
One port(*)
･
Display
Monitor that can display with XGA
(Monitor that can display with the resolution of more than
1024×768 dots)
(Monitor that can display with the resolution of more than
1024×768 dots)
･
Graphics chip or graphics card that uses DirectX9.0c or higher, and graphic driver
(*) If there is no RS232C port in your PC, it is possible to connect to the USB port using
a commercially available USB-serial converter. However, please note that some USB
ports or serial converters reduce communication speed or make communication
impossible.
★
Tools
You need a Phillips screwdriver for M2.0 mm Phillips screws to maintain or to
reassemble this product. The following additional tools are also recommended for the
easiest assembly.
A pair of tweezers, a straight slot screwdriver, a cutter, and a printer for printing
manuals and instructions.
reassemble this product. The following additional tools are also recommended for the
easiest assembly.
A pair of tweezers, a straight slot screwdriver, a cutter, and a printer for printing
manuals and instructions.