VeriFone 1619-20XPL ユーザーズマニュアル
CONFIDENTIAL
Version A
Page 13 of 37
MasterCard® PayPass™ Contactless Transit Pilots
Installation Guide
2.5.3
Stage 3 – Installing the Phase 2 hardware
1.
Select the Contactless Reader Assembly [1]. Ensure that the OTI Reader cable [4]
and the LED Board cable [5] are attached to the card reader assembly.
and the LED Board cable [5] are attached to the card reader assembly.
2.
Position so that the attached cable assemblies can be fed through the second lowest
square aperture on the front of the turnstile, as shown. Feed the two cable
assemblies through the aperture.
square aperture on the front of the turnstile, as shown. Feed the two cable
assemblies through the aperture.
3.
Secure the contactless card reader assembly to the turnstile using the bracket
[retained from phase 1], washer [retained from phase 1] and bolts [retained from
phase 1].
[retained from phase 1], washer [retained from phase 1] and bolts [retained from
phase 1].