VeriFone E265G ユーザーズマニュアル

E

265G I

NSTALLATION

 G

UIDE

V

E R

I

F

O

N E

O

N F

I D

E N

T I

A

L

R

EVIS

IO

N

 A

.6

 

The device shifts to power pack mode and starts up automatically when the 
e265G is connected to a non-battery power source, regardless of the battery 
charge state.

Hold the green key down for about 4 seconds until the device displays the startup 
screen.

The device lights up once the power is on.

Hold the red key down for about 4 seconds until the device displays the startup 
screen.

After installing the battery, connect the e265G device to the provided power pack 
for initial charging.

Each e265G device comes with power supply (VPN PWR087-300-01-A) used to 
connect the device directly to a power outlet and to charge the battery. The e265G 
unit comes with a universal input power pack capable of operating from voltages 
of 100 V to 240 V AC.

The 4-second power-up delay prevents device startup if the green key is 

accidentally held down. The time required to hold the green key down to power 
up the device is configurable.

The Verifone copyright screen starts and displays a unique copyright screen 

once the device loads an application. However, DOWNLOAD NEEDED appears 
on screen after the initial Verifone copyright screen if there is no available 
application in the device.

The screen is blank when the device has no power.

Using an incorrectly rated power supply may damage the device or cause it not 

to work as specified. Before troubleshooting, ensure that the power supply being 
used to power the device matches the requirements specified on the bottom of 
the device. (See 

 for detailed power supply specifications.) Obtain 

the appropriately rated power supply before continuing with troubleshooting.

Do not plug the power pack into an outdoor outlet or operate the device outdoors.

During a transaction, disconnecting the power by removing the battery or 

unplugging the device from a wall power while at very low battery charge may 
cause transaction data files not yet stored in the device memory to be lost.