VeriFone MX915CTLS ユーザーズマニュアル

DRAFT

March 1, 2012

The MX 900 Series terminal can be mounted on a wall. To wall mount the MX 900 
Series terminal:

1. Create a template of the three key hole slots on the bottom of the 

MX 900 Series terminal.

2. Locate a wall stud to base center placement of the MX 900 Series 

terminal unit.

3. Mark the hole placement on the desired wall location.

4. Prepare holes for screw placement. For mounting into drywall use 1/8" 

Hollow Wall Anchors. Other stud mountings use #6 trim screws. After 
installation apply 30 pounds force downward to ensure proper mounting.
a. Create a small hole in which to screw in self-tapping wood screws, or
b. Insert molly screws into prepared holes in sheet rock wall.

5. Insert screws into prepared holes, leaving approximately 6.35mm (1/4”) 

of the screw above the level of the wall.

Adjust the screw depth till the unit is firmly mounted.

6. Align and seat screws in the key hole slots.

7. Slide the MX 900 Series terminal down until the unit seats securely.

Key Hole Slots
Mounting Holes