VeriFone OMNI3600 ユーザーズマニュアル
39
Omni 3600 Installation Guide
To connect the Omni 3600 base to power (
Figure 3
):
1
Insert the round barrel connector into the power
port (icon at right) on the far right of the Omni 3600
base.
port (icon at right) on the far right of the Omni 3600
base.
2
Insert the power cable into the power pack.
3
Plug the power cable into a wall outlet or surge
protector. When the Omni 3600 base is powered, the
far-right LED (icon at right) lights steady green.
protector. When the Omni 3600 base is powered, the
far-right LED (icon at right) lights steady green.
Omni 3600 Terminal Docking
Place the Omni 3600 terminal in the docking cradle
(
(
Figure 21
) to recharge the terminal smart battery, establish
communications connections for data transfers, and
communicate with peripheral devices.
communicate with peripheral devices.
Spare Smart Battery Pack
Spare smart battery packs for the Omni 3600 terminal can be
ordered from VeriFone. See
ordered from VeriFone. See
Accessories and Documentation
for ordering information. To charge a smart battery, place the
NOTE
It is recommended that the power pack be plugged into a
power surge protector to protect against possible
damage caused by lightning strikes and electrical
surges.
power surge protector to protect against possible
damage caused by lightning strikes and electrical
surges.
NOTE
The Omni 3600 terminal will not turn off or enter sleep
mode while docked on the Omni 3600 base. This
ensures that the unit is not placed into sleep mode
during data transfers. The unit must be turned off
manually when docked on the Omni 3600 base. See
mode while docked on the Omni 3600 base. This
ensures that the unit is not placed into sleep mode
during data transfers. The unit must be turned off
manually when docked on the Omni 3600 base. See
Turn On/Off the Omni 3600 Terminal
.