VeriFone QX700CTLS ユーザーズマニュアル
S
ETUP
Installing or Replacing SAM Cards
12
QX700 I
NSTALLATION
G
UIDE
R
EV
IS
IO
N
A
.10
Front Functions
The front of the contactless device shows the following:
•
Customer-view indicator LED.
•
A contactless reader panel.
Back Functions
The rear of the contactless device shows the RS-232 connector.
Installing or
Replacing SAM
Cards
You may need to install a security access module (SAM) card or replace the old
card.
card.
To install or replace
SAM cards
1
Disconnect the device from any external devices.
2
Place the reader face down on a soft, clean surface to protect from scratches.
3
Using a Phillips head screwdriver, unscrew and remove the back casing to
access the SAM card holder.
access the SAM card holder.
Figure 3
Removing QX700 Back Casing
4
Open the SAM cardholder, by sliding the locking tab to the
OPEN
position.
5
Carefully slide the SAM card into the slot, by aligning the card and carefully
sliding into the slot until fully inserted.
sliding into the slot until fully inserted.
CAUTION
Observe standard precautions in handling electrostatically sensitive devices.
Electrostatic discharges can damage the equipment. VeriFone recommends
using a grounded anti-static wrist strap.
using a grounded anti-static wrist strap.