VeriFone VX600BTCTLS ユーザーズマニュアル

VX 600 B

LUETOOTH

 A

GNOSTIC

 I

NSTALLATION

 G

UIDE

To manually startup and shutdown the VX 600 Bluetooth Agnostic, press and hold 
either the Cancel key or Power button, depicted in 

. 

The system status LEDs beside the micro-USB port indicate the status of the 
device when turned on.

Connect the VX 600 Bluetooth Agnostic to other devices using the Micro-USB 
cable or via Bluetooth.

The same micro-USB cable used to charge the battery can also be used to 
connect the VX 600 Bluetooth Agnostic to a host computer to synchronize data or 
update the device’s firmware.

Disconnect power from the host computer. 

Connect the micro-USB cable into the port located on the left side of the 
VX 600 Bluetooth Agnostic.

Connect the other end of the micro-USB cable into the host computer’s USB 
port.

Y

Green (Blinks every 4 seconds)

Y

Red, 1Hz rate, 50% duty cycle 
(battery extremely low condition: 
battery voltage < 3.6V)

Y

Red, 4Hz rate, 50% duty cycle 
(battery low condition: battery 
voltage < 3.7V)
Red on continuously

Y

Orange, 1Hz rate, 50% duty cycle

Y

Orange on continuously

Y

Green on continuously