Brother Industries Ltd. 5V8001 ユーザーズマニュアル

Before Use

12

Button functions are as follows: 

The ON/OFF button lamp (blue) and Error lamp (red) indicate the current operating status. 

ON/OFF button (

)

Turns the printer on and off. 

Feed and Cut button (

)

Feeds and cuts the printed labels.
Use this button when the auto cut option in the printing dialog 
box is not checked. 

* Unable to use when SZ tape is loaded. 

Open Cover button

Opens the cover. 

Not lit

Not lit

• The printer is off. 

Lit

Not lit

• The printer is working normally. 

Flashing

Not lit

• The printer is receiving data from the computer. 

Wait for a while. 

Flashing

Lit

• The printer is receiving data from the computer, but unable 

to print. 
Load a tape cassette and close the cover. 

Lit

Lit

• No tape cassette is loaded, or the cover is open. 

Load a tape cassette and close the cover. 

• The Feed and Cut button was pressed when SZ tape is 

loaded. (Unable to use the Feed and Cut button when SZ 
tape is loaded.)

• You reached the end of the SZ tape. Remove the SZ tape 

cassette and check the surface of the tape.  If "END" is 
printed on the tape, replace the cassette with a new SZ 
tape cassette. 

Lit

Flashing

• A print job is received, but the printer cannot print. Load the 

correct tape cassette and close the cover. 

• If ERROR is printed on the SZ tape, an error occurred 

when writing data to the RFID tag or the tag is damaged. 
Try printing again. 

Lit

Flashing 

Rapidly

• Make sure that the tapes are not jammed in the printer. 

Turn the printer off and on. 

* If the problem is not solved, contact your dealer or 

authorized service center. 

Lit

Flashing Very 

Rapidly

• Turn off the printer, and then turn it on again. 
* If the problem is not solved, contact your dealer or 

authorized service center.