Brother Industries Ltd. 8CAA20 ユーザーズマニュアル
Troubleshooting and Routine Maintenance
99
Transferring your faxes or Fax
Journal report
Journal report
B
If the LCD shows:
Change Unable XX
Change Unable XX
, Clean Unable XX,
Init. Unable XX
, Print Unable XX,
Scan Unable XX
or Tel Disabled, we
recommend transferring your faxes to
another fax machine. (See Transferring faxes to another fax machine on page 99.)
another fax machine. (See Transferring faxes to another fax machine on page 99.)
You can also transfer the Fax Journal report
to see if there are any faxes you need to
transfer. (See Transferring Fax Journal report to another fax machine on page 99.)
to see if there are any faxes you need to
transfer. (See Transferring Fax Journal report to another fax machine on page 99.)
Note
If there is an error message on the
machine's LCD, after the faxes have been
transferred, disconnect the machine from
the power source for several minutes, and
then reconnect it.
machine's LCD, after the faxes have been
transferred, disconnect the machine from
the power source for several minutes, and
then reconnect it.
Transferring faxes to another fax
machine
machine
B
If you have not set up your Station ID, you
cannot enter fax transfer mode.
cannot enter fax transfer mode.
a
Press Menu, 9, 0, 1.
b
Do one of the following:
If the LCD shows No Data, there are
no faxes left in the machine's
memory.
Press Stop/Exit.
no faxes left in the machine's
memory.
Press Stop/Exit.
If the LCD shows Enter Fax No.,
enter the fax number to which faxes
will be forwarded.
enter the fax number to which faxes
will be forwarded.
c
Press Black Start.
Transferring Fax Journal report to
another fax machine
another fax machine
B
If you have not set up your Station ID, you
cannot enter fax transfer mode.
cannot enter fax transfer mode.
a
Press Menu 9, 0, 2.
b
Enter the fax number to which Fax
Journal report will be forwarded.
Journal report will be forwarded.
c
Press Black Start.
Document jam
B
Documents can jam if they are not inserted or
fed properly, or if they are too long. Follow the
steps below to clear a document jam.
fed properly, or if they are too long. Follow the
steps below to clear a document jam.
Document is jammed in the top of the
ADF unit
ADF unit
B
a
Take out any paper from the ADF that is
not jammed.
not jammed.
b
Open the ADF cover.
c
Pull the jammed document up and to the
left.
left.
d
Close the ADF cover.
e
Press Stop/Exit.
Note
To avoid document jams, close the ADF
cover properly by pressing it down in the
middle.
cover properly by pressing it down in the
middle.