Brother Industries Ltd. 8CAE19 ユーザーズマニュアル
Troubleshooting and Routine Maintenance
139
B
Error animation
B
Error animation displays step-by-step
instructions when paper gets jammed or ink
cartridges become empty. You can read the
steps at your own pace by pressing c to see
the next step and d to go backward. If you do
not press a key after 1 minute the animation
starts running automatically again.
instructions when paper gets jammed or ink
cartridges become empty. You can read the
steps at your own pace by pressing c to see
the next step and d to go backward. If you do
not press a key after 1 minute the animation
starts running automatically again.
Note
You can press d, c or OK to pause the
auto-animation and go back to step-by-
step mode.
auto-animation and go back to step-by-
step mode.
Transferring your faxes or Fax
Journal report
Journal report
B
If the LCD shows:
Unable to Change XX
Unable to Clean
XX
Unable to Init.
XX
Unable to Print
XX
Unable to Scan
XX
Unable to use Phone XX
We recommend transferring your faxes to
another fax machine or to your PC. (See
Transferring faxes to another fax machine on page 140 or Transferring faxes to your PC on page 140.)
another fax machine or to your PC. (See
Transferring faxes to another fax machine on page 140 or Transferring faxes to your PC on page 140.)
Unable to Clean
XX
Unable to Init. XX
Unable to Print XX
Unable to Scan XX
Unable to use Phon
e XX
The machine has a mechanical
problem.
problem.
—OR—
A foreign object such as a clip or
ripped paper is in the machine.
ripped paper is in the machine.
Open the scanner cover and remove any
foreign objects inside the machine. If the
error message continues, do one of the
following:
foreign objects inside the machine. If the
error message continues, do one of the
following:
Disconnect the machine from the
power for several minutes, then
reconnect it. (The machine can be
turned off for approximately 24 hours
without losing faxes stored in the
memory. See Transferring your faxes or Fax Journal report on page 139.)
power for several minutes, then
reconnect it. (The machine can be
turned off for approximately 24 hours
without losing faxes stored in the
memory. See Transferring your faxes or Fax Journal report on page 139.)
Unusable Device
Disconnect device
from front connect
or & turn machine
off & then on
A broken device has been
connected to the USB direct
interface.
connected to the USB direct
interface.
Unplug the device from the USB direct
interface, then press On/Off to turn the
machine off and then on again.
interface, then press On/Off to turn the
machine off and then on again.
Unusable Device
Please Disconnect
USB Device.
A USB device or USB Flash
memory drive that is not
supported has been connected to
the USB direct interface.
memory drive that is not
supported has been connected to
the USB direct interface.
Unplug the device from the USB direct
interface.
interface.
Wrong Paper Size
Paper is not the correct size.
Load the correct size of paper (Letter,
Legal or A4), and then press Black Start
or Color Start.
Legal or A4), and then press Black Start
or Color Start.
Error Message
Cause
Action