Porta Phone Company Inc TD900HDM ユーザーズマニュアル

ページ / 3
USER MENU
1. Power ON/OFF
Power ON: Press and hold the power button till to BLUE LED light up.
Power OFF: Press and hold the power button till to the RED LED flashing.
2. Pairing/Register mode
a). Press and hold the power button to turn headset power ON, the power LED should
blinking in BLUE color.
b). Press the volume down button
at 3 times continually, then press and hold the
volume up
till to the (REMOTE) RED and Blue LED blinking at alternately or (MASTER)
RED LED blinking.
c). Press the power ON/OFF switch of Master headset to select register to Line(Group) 1,
Line 2 or Line 3.
LINE condition indicate: Line 1: RED LED blinking; Line 2: BLUE LED blinking; Line 3:
ORANGE LED blinking.
d). The LED of Remote headset will turn RED after paired, press the power button to quit
the pairing mode.
e). Repeat the above step “a” to “d” for more Remote headset register on same Master,
press the power
button to finish the register.
(Note:
. The Master headset can accept maximum 8 remote register in line 1 (Group) and
Line 2 communication in duplex, total register number over 250 headset available on Line
3 but listening only after the 8
th
headset registered on Line 1 and 2.
②. The the power ON/OFF switch of Master headset for select the Line(GROUP) of the
headset connection. Press power ON/OFF button to select the headset register under the
Line(Group) 1, 2 or Line3 (Line 3 for listening only).
3. Talking and listening
a). The master and remote headset will start to search each other after power ON, the BLUE
LED flash 1 time each 3 seconds. The headset will be link together automatically when the
pairing ID confirmed by master and LED turn ON in blue color.
b). Press the volume up
and down
button to adjust speaker sound volume.
c). The side switch of Master headset for CONFERENCE ON/OFF. Press the switch to
separate the Line (Group) 1, 2 or make all conference.
d). The side switch of Remote headset for select the connection to Line(Group) 1 or
Line(Group) 2.
4. Mic Muted
Swivel up the Mic boom to MUTE the microphone and swivel down to back the normal
talking.