UTC Fire & Security Americas Corporation Inc 910C-SIMON ユーザーズマニュアル
Chapter 4
Programming
43
Phone numbers
Phone options
Table 14. Phone numbers
Function
Default
Description
Phone # 1
Blank
Lets you program up to a 26-digit central monitoring station receiver/voice event
notification phone number for monitored systems. Phone digits can be 0-9, *, #, or a
pause (P).
To delete the phone number, press DISARM while editing a phone digit. To add a pause
to the phone number press BYPASS. Pressing Enter is required if you enter fewer than 26
digits.
notification phone number for monitored systems. Phone digits can be 0-9, *, #, or a
pause (P).
To delete the phone number, press DISARM while editing a phone digit. To add a pause
to the phone number press BYPASS. Pressing Enter is required if you enter fewer than 26
digits.
Phone # 2
Blank
Phone # 3
Blank
Phone # 4
Blank
Downloader #
a
a.
Not investigated for use by UL.
Blank
Lets you program up to a 26-digit phone number for the Enterprise Downloader.
Table 15. Phone options
Function
Default
Description
Man phone test
On
Determines whether the user can perform a manual communication test to verify
communication to a central station/voice dial (on), or not (off). If you have all 4 phone #
programmed it should send a test report to all 4 before showing that test is okay.
communication to a central station/voice dial (on), or not (off). If you have all 4 phone #
programmed it should send a test report to all 4 before showing that test is okay.
FTC
On
Determines whether the panel and interior sirens sound trouble beeps if it is unable to
successfully send a report to a central station (on) or not (off).
successfully send a report to a central station (on) or not (off).
DTMF dial
On
Determines whether the panel uses DTMF (on) or pulse (off) for dialing programmed
phone numbers.
phone numbers.
300 bps enabled On
Determines whether the baud rate used by the panel for central station communication
is 300 bps (on) or 110 bps (off).
is 300 bps (on) or 110 bps (off).