HP SDGOB1191 ユーザーズマニュアル

4.

Hold the ink cartridge by its sides with the bottom pointing up and locate the

electrical contacts on the ink cartridge. The electrical contacts are four small

rectangles of copper or gold-colored metal on the bottom of the ink cartridge.

5.

Wipe only the contacts with a dry swab or lint-free cloth.

CAUTION:

Be careful to touch only the contacts, and do not smear any of the

ink or other debris elsewhere on the cartridge.

6.

On the inside of the product, locate the contacts in the printhead. The contacts look

like a set of four copper or gold-colored pins positioned to meet the contacts on the

ink cartridge.

7.

Use a dry swab or lint-free cloth to wipe the contacts.

8.

Reinstall the ink cartridge.

9.

Close the access door, and check if the error message has gone away.

10

.

If you still receive the error message, turn the product off, and then on again.

Setup Cartridges

When you first setup the printer, you must install the cartridges that shipped in the box

with the printer. These cartridges are labeled SETUP, and they calibrate your printer

before the first print job. Failure to install the SETUP cartridges during the initial product

setup causes an error. If you installed a set of regular cartridges, remove them and install

Setup Cartridges

51

Solve a 

problem

DRAFT