Zoom Telephonics Inc 1067WL ユーザーズマニュアル
Chapter 2: Setting Up Your Wireless Network
30
Checking Your Settings
If you ever need to check your wireless settings, you can do so
from the Wireless Setup page. This page is available in the Zoom
Configuration Manager by clicking the Wireless icon.
The table below explains the settings:
from the Wireless Setup page. This page is available in the Zoom
Configuration Manager by clicking the Wireless icon.
The table below explains the settings:
This setting…
Lets you specify…
Wireless Status
Enable shows that your wireless network is up.
Disable indicates that your wireless network is
down.
Disable indicates that your wireless network is
down.
SSID
The Service Set Identifier for your wireless network.
By default, the SSID for the
By default, the SSID for the
X6v
is zoom. You can
change the SSID to any name that you want.
Hide SSID
Set to true if you do not want to broadcast the SSID
of your network.
of your network.
Default Channel
The channel your wireless connection uses by
default for your wireless connection. The
default for your wireless connection. The
X6v
comes set for channel 10.
Profile
The standard used by your wireless adapters. This
drop-down list contains 802.11b Only, 802.11g
Only, or Mixed Mode.
drop-down list contains 802.11b Only, 802.11g
Only, or Mixed Mode.
The default is Mixed Mode, which allows you to
mix both b and g wireless adapters.
mix both b and g wireless adapters.
Encryption
The type of encryption used for your wireless
Internet signal. This drop-down list contains None,
WEP-64 bit, WEP 128 bit, WPA and WPA2.
Internet signal. This drop-down list contains None,
WEP-64 bit, WEP 128 bit, WPA and WPA2.
The default is None, meaning that no security is
enabled.
enabled.
Region
If your country is not listed, select Other.