Tae Kwang Industrial Co Ltd GMRS310 ユーザーズマニュアル
- 6 -
3) VOLUME adjustment
When power supply is lighted, decrease if volume increases and turns for class
clockwise if operate [VOL/PWR] handle for clockwise .
clockwise if operate [VOL/PWR] handle for clockwise .
2 . Currency function . ? [PTT] (Push To Talk) button utilization
1) Status that do not click any button is automatic reception air status.
2) If click side [PTT] button, get into transmitter state. When click [PTT] button, transmit message to other person.
This time, "TX" icon appears to LCD.
3) If message delivery ends, put [PTT] button. Come into in reception air state.
3 . SCAN/MONITOR function
1) SCAN function
a. If click side [MON] shortly, search use frequency.
b. While search channel, if click [
b. While search channel, if click [
]/[
] channel search direction increase of each channel or Convert for
decreasing direction.
c. Finish While search channel, receive signal until reception ends in relevant channel if there is reception
lake, and reception two, [after 5 seconds] automatically from next time channel search begin
d. If click side [MON] again shortly, stop channel search and return before channel search to channel.
2) MONITOR function .
a. If click side [MON] long, regardless of ton code, signal that enter to established channel plain number.
b. If there is no aural signal to established channel, background noise is heard. Reception indication icon
b. If there is no aural signal to established channel, background noise is heard. Reception indication icon
“BUSY” of LCD appears.
4 . LAMP/LOCK function
1) LAMP function
If press [F]/[ ]/[ ], LCD is lighted for 5 seconds.
2) LOCK function . - Button fastening function .
a . Can prevent case that change If click [F] long, get into button fastening state and "Key indication" icon of
LCD appears channel or ton e code to a mistake.
b . If press [F] again long, LCD is "Key indication" icon this getting into button fastening cancellation state.
5.CALL function .
If press [ENTER] in reception stand-by status, CALL signal is sent out to other person.
6 . Channel selection & ton code (CTCSS) selection .
1) Channel selection(1~22)
a. [F] 1st repeatedly channel selection mode select .
b. Set -channel using [
]/[
] while channel blinks.
c. [ENTER] repeatedly established channel store .
2) Ton code (CTCSS) selection
(01~38)
a. [F] 2nd repeatedly ton code mode select .
b. Establish Channel using [ ]/[ ] while Tone Code blinks.
(If select '00', can receive signal regardless of other person's ton code.)
c. [ENTER] stores establishment repeatedly.
c. [ENTER] stores establishment repeatedly.
3) channel & frequency spectrum designation
Specified frequency and channel are marked alternately in LCD when press [F]
and [ENTER] at t he same time.
and [ENTER] at t he same time.
7 . DUAL WATCH function
By function that can receive channel separately except existent established channel the two channels
alternately reception signal inspect .
1) [F] 3rd repeatedly DUAL WATCH mode select .
alternately reception signal inspect .
1) [F] 3rd repeatedly DUAL WATCH mode select .