Tzone Digital Technology Co. LTD TZ-TT18 ユーザーズマニュアル

ページ / 13
Tzonedigital_TT18 V2.1 Apr27, 2017
A2. LED
Charge status (Red)
B. USB Port
Configure or charge the machine
C. SIM card slot
Insert the SIM card
D. Button
Turn on the unit or to know the machine’s status with press
4. Device mode
Device mode
Instructions
Turn on mode
When pressing the button after 5 seconds left or set 005
command by serial port ( in turn off /flight mode, note:
need pressing the button for 15s in flight mode)
Turn off mode
Only set 005 command can let the device turn off ( in turn
on/flight mode,note:set 005 command only by serial port in
Flight mode)
Flight mode
When pressing the Button for 15s or set 005 command,only
save and not sending data in this mode ( in turn on/turn off
mode, note: set 005 command only by serial port in turn off
mode)
5. Indicator status
Note: The A1 Red+Green LEDs of the device will blink at the same time when
the machine is boot. If you’d like to know the device’s status, you need to press
the button after 0.5 seconds left, then the led will show to you which status in
now and the LED only last 10s every time. If the device status led is off , the
mean is the device is off, There is priority of the device’s status, the greater
number, the higher priority, flashing as follows:
A1.Green+Red LED - indicating the device status
Device led status
Instructions
Priority
Green and Red led each on 0.1 seconds
Boot
Green On for 0.1 seconds and off for 0.1
seconds
Working properly
1
Red On for 0.1 seconds and off for 0.1
seconds
Battery low voltage
2
Red always on
Device have problem (no
signal and can’t send data
to server)
3
Green On for 1 seconds and off for 1
seconds
Flight
4