Biolog-id PRD73302C ユーザーズマニュアル
TableTop User’s Manual
Version : 0.1
Intern approval date of the manual: 26/02/2018
2 sur 4
1. Description of the device
1.1. Short description of the product
The RFID Reader is meant to read and write tags complying with the standard iso 15693. It can read
multiple tags at the same time. It can select which blocks of the memory it is reading or writing. The
reading area is above the flat surface (the antenna). To maximize efficiency of reading, your tag
should be parallel to the antenna, (parallel to the flat surface). In addition, you cannot read two tags
overlapping each other. There has to be at least half a centimeter between two tags. Keep in mind
there is no software provided with the RFID Reader in order to control it.
multiple tags at the same time. It can select which blocks of the memory it is reading or writing. The
reading area is above the flat surface (the antenna). To maximize efficiency of reading, your tag
should be parallel to the antenna, (parallel to the flat surface). In addition, you cannot read two tags
overlapping each other. There has to be at least half a centimeter between two tags. Keep in mind
there is no software provided with the RFID Reader in order to control it.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2)
THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2)
THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY
APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
1.2. Description of the provided components
The RFID Reader is provided with 4 components.
An Ethernet cable
An Ethernet cable
-A male USB A to a male mini USB cable
-A 12V-Feig power supply with the fitting connector
-The reader itself