Zhuhai HengYu New Technology Company Limited POKERIV ユーザーズマニュアル
2
Programming Usage
1.Press PMode(FN + R CTRL) to enter the Programming mode (Right LED on Space bar blinking)
2.Press the desire key to program (Right LED on Space bar ON)
3.Key in the program content and then press PN again (Right LED on Space bar blinking again)
4.Repeat steps 2&3 for programming the other keys
5.Press PMode(FN + R CTRL) to quit the programming mode (Right LED on Space bar OFF)
Remarks:
•
1.Press PMode(FN + R CTRL) to enter the Programming mode (Right LED on Space bar blinking)
2.Press the desire key to program (Right LED on Space bar ON)
3.Key in the program content and then press PN again (Right LED on Space bar blinking again)
4.Repeat steps 2&3 for programming the other keys
5.Press PMode(FN + R CTRL) to quit the programming mode (Right LED on Space bar OFF)
Remarks:
•
Support FN layer programming,while choosing the desire key to program, user can also press FN +
any combination (e.g: FN + A) as an option
any combination (e.g: FN + A) as an option
•
During choosing keys (Step1), open an notepad (e.g: *.txt type) and then press PN + any key, if the key
has been programmed, the content will be displayed on the text file.
has been programmed, the content will be displayed on the text file.
•
Delay can be added into the program content ,press 15ms key (FN + F) one time for adding 15ms
time delay,press 0.1s key (FN + G) one time for adding 0.1s time delay,press 0.5s key (FN + H) one
time for adding 0.5s time delay, continuing press any one of the time delay key will add the sum of the
delay time, e.g. press 5 times of 0.1s key continuously will add 0.5s time delay to the programming
content.
time delay,press 0.1s key (FN + G) one time for adding 0.1s time delay,press 0.5s key (FN + H) one
time for adding 0.5s time delay, continuing press any one of the time delay key will add the sum of the
delay time, e.g. press 5 times of 0.1s key continuously will add 0.5s time delay to the programming
content.
•
Each key support programming up to 64 characters
•
During in the programming mode, within 15s without any action then the programming mode will quit
automatically.
automatically.
•
press PN + programmed keys to use it; or press Toggle key (FN+R SHIFT) first and let the indication
LED at the top left corner turn ON,then press the programmed keys directly with FN,while the
toggle LED is on, press FN + any programmed keys will issue the original key code
LED at the top left corner turn ON,then press the programmed keys directly with FN,while the
toggle LED is on, press FN + any programmed keys will issue the original key code
Programming Example
1. Program “A” into 123: FN + R CTRL, A, 1, 2, 3, PN
2. Continue to program “FN + A” into 456: FN + A, 4, 5, 6, PN
3. Continue to program “B” into CTRL+C: B, holding CTRL, press C, release CTRL and C, PN
4. Continue to program C for evoking CMD.EXE (in WIN7): WIN, C, FN+G, M, FN+G, D, FN+H(time delay),
ENTER, PN
5. Quit: FN + R CTRL
6. Using programmed “A”: PN + A => output as “123”
7. Using programmed “FN + A”: PN + FN+ A => output as “456”
8. Using programmed “C”: PN + C => evoke CMD.EXE
9. Switching into programmed layer: Toggle (FN + R SHIFT) => toggle LED ON
1. Program “A” into 123: FN + R CTRL, A, 1, 2, 3, PN
2. Continue to program “FN + A” into 456: FN + A, 4, 5, 6, PN
3. Continue to program “B” into CTRL+C: B, holding CTRL, press C, release CTRL and C, PN
4. Continue to program C for evoking CMD.EXE (in WIN7): WIN, C, FN+G, M, FN+G, D, FN+H(time delay),
ENTER, PN
5. Quit: FN + R CTRL
6. Using programmed “A”: PN + A => output as “123”
7. Using programmed “FN + A”: PN + FN+ A => output as “456”
8. Using programmed “C”: PN + C => evoke CMD.EXE
9. Switching into programmed layer: Toggle (FN + R SHIFT) => toggle LED ON
(1) Using programmed “B”: B => output as CTRL + C (remarks: same as “COPY”)
(2) Using programmed “FN + A”: FN+ A => output as “456”(remarks: no need to press PN)
(3) Using programmed “C”: C=> evoke CMD.EXE
(4) to issue“A”key code(at this moment press“A”is issuing “123”): PN + A => A
(2) Using programmed “FN + A”: FN+ A => output as “456”(remarks: no need to press PN)
(3) Using programmed “C”: C=> evoke CMD.EXE
(4) to issue“A”key code(at this moment press“A”is issuing “123”): PN + A => A
Factory reset
To restore factory setting, press and hold FN + R for 3secs, then after 3 secs the ToggleLED will start to
blink,continuing the hold the FN + R until the ToggleLED blinks for 9 times, then keyboard is successfully
restored back to factory setting
3
Low BATT indication usage
1. While the Bluetooth is not successfully paired,the Low BATT indication LED is OFF
2. If the keyboard is then successfully paired and connected to the device for operation,the Low BATT
indication LED will turn ON with lowest brightness level for showing the paired status
3. If connection has lost, the Low BATT indication LED will turn OFF, reconnect to the device will turn it
ON again
4. While the Battery capacity is not enough for sustaining the keyboard for a successive 8 hours operation,
the Low BATT indication LED with light up with mid level of brightness, and blinks twice within an hour
1. While the Bluetooth is not successfully paired,the Low BATT indication LED is OFF
2. If the keyboard is then successfully paired and connected to the device for operation,the Low BATT
indication LED will turn ON with lowest brightness level for showing the paired status
3. If connection has lost, the Low BATT indication LED will turn OFF, reconnect to the device will turn it
ON again
4. While the Battery capacity is not enough for sustaining the keyboard for a successive 8 hours operation,
the Low BATT indication LED with light up with mid level of brightness, and blinks twice within an hour
FN general function list
Remarks
FN
+
ESC
=
` ~
Change Key value
1
F1
2
F2
3
F3
4
F4
5
F5
6
F6
7
F7
8
F8
9
F9
0
F10
- _
F11
= +
F12
BACKSPACE
DEL
I
INS
P
PRINT SCREEN
[ {
SCROLL LOCK
] }
PAUSE
ENTER
Numpad ENTER
; :
HOME
' “
PAGE UP
X
APP
. >
END
/ ?
PAGE DOWN
W
↑
A
←
S
↓
D
→
FN multi-media function key list
Remarks
FN
+
Y
=
Evoke calculator
Change Key value
N
Volume down
M
Volume up
, <
mute