Fathom Systems Inc. TAG0310 ユーザーズマニュアル
Quick Start Guide
Introducing Fathom
TM
Tag
Congratulations on your purchase of the Fathom Tag. The following instructions will walk you
through the process of turning on your and claiming your Fathom Tag to your organization using
Fathom™ Control.
through the process of turning on your and claiming your Fathom Tag to your organization using
Fathom™ Control.
Prerequisites
Fathom Control Account
In order to claim a Fathom Tag to an organization you will need a deployment of Fathom Hubs
and a Fathom Control Account. Navigate to your organization and the venue that you want to
deploy the Tags at.
For information on Fathom Control visit:
In order to claim a Fathom Tag to an organization you will need a deployment of Fathom Hubs
and a Fathom Control Account. Navigate to your organization and the venue that you want to
deploy the Tags at.
For information on Fathom Control visit:
Fathom Control Login:
Configuration
Turning on your Tags
1. Unpack your Fathom Tags from their shipping packaging.
2. Remove the mounting clip from the beacon body to access the power button.
3. Fathom Tag LED will light up to indicate power activation.
4. After five (5) seconds the beacon LED should turn off.
5. Complete the beacon activation process for the remaining beacons you wish to deploy.
Claiming Your Beacons
6. Navigate to Fathom Control and the venue you wish to add the beacons at and select a
6. Navigate to Fathom Control and the venue you wish to add the beacons at and select a
beacon icon. You can now add a label to the beacon in Fathom Control so you can identify it
on the map. We recommend that this label be descriptive and indicate if the beacon is
intended to be moving or stationary.
on the map. We recommend that this label be descriptive and indicate if the beacon is
intended to be moving or stationary.
7. Once labelled click the LIGHT ME UP button in Fathom Control to indicate the beacon in
question by turning on its LED light, which will help you identify it among the beacons you
are deploying. Once identified you can then physically label the beacon or deploy it in its
designated installation location.
are deploying. Once identified you can then physically label the beacon or deploy it in its
designated installation location.
8. Continue this process for the remainder of the beacons you are installing.