ShenZhen Gather Genius Technology Limited MMBQ11 ユーザーズマニュアル
http://www.uascent.com/
23
8.7.17.
RF_ IQ AMP
Instruction
AT+RADIO_RF_IQAMP=<range>
parameter
<range>: (-7~7)
return
N
example
AT+RADIO_RF_IQAMP=0
8.8.
Other description
8.8.1.
Uart to Wi-Fi transfer
Instruction
AT+WIFIUART_DEMO=<en>
parameter
<en>: (enable, disable)
return
N.
After enable WIFIUART mode, user use smart phone app or PC program
connect to this module , the socket port is 12345, then, user can
transfer data to wifi network by Data_Uart.
The data string must be end with hex value 0x0D, or the length of
string is equal to 128, then the datas will be sent out.
After enable WIFIUART mode, user use smart phone app or PC program
connect to this module , the socket port is 12345, then, user can
transfer data to wifi network by Data_Uart.
The data string must be end with hex value 0x0D, or the length of
string is equal to 128, then the datas will be sent out.
example
ssv6060>:AT+WIFIUART_DEMO=enable
Call AT_WIFIUART_DEMO
wifiUartDemo_process begin
Call AT_WIFIUART_DEMO
wifiUartDemo_process begin
tcp_server_wifiUartProcess begin
Installation warning statement
(a)product should not collocate with other radio
(b) The MMBQ11 Wi-Fi Module is designed to comply with the ID statement. FCC ID is
2ALLFMMBQ11. The host system using MMBQ11 Wi-Fi Module, should have label
indicated FCC ID 2ALLFMMBQ11
2ALLFMMBQ11. The host system using MMBQ11 Wi-Fi Module, should have label
indicated FCC ID 2ALLFMMBQ11
(c) If you buy this module,you only use the the PCB antenna(ANT Gain:0dBi) of WIFI modular,Do not
use the other antenna
(d): The MMBQ11 Wi-Fi Module is Only applicable for the mobile device.