ShenZhen Gather Genius Technology Limited MMBQ11 ユーザーズマニュアル
http://www.uascent.com/
2
1.
GENERAL DESCRIPTION
The MMBQ11module supports standard IEEE802.11 b/g/n protocol, TCP/IP stack and
support STA, AP, STA+AP work mode. It can be used in the present device for additional Wi-Fi
feature, or to design standalone network controller.
feature, or to design standalone network controller.
MMBQ11 is a total solution for Wi-Fi network, which can be used separately.It can boot
from external flash directly and designed to work with external MCU.In this case, MMBQ11can
be added to any micro-controller system through UART interface.
be added to any micro-controller system through UART interface.
MMBQ11 is highly integrated with antenna switch, BALUN, PA, PMU. It just needs a few
components for external circuit, which help to save the PCB room and cost furthest.
1.1. Features
• Support 802.11 b/g/n;
• Embedded TCP/IP protocol stack;
• Integrated TR switch/Balun/LNA/PA/antenna;
• MCU clock frequency up to 160M, internal cache 8kB;
• Integrated 16Mbitsflash;
• Supply voltage range: 4.75V~5.25VDC, single 5V is recommended to use.
• Support OTA firmware upgrade, which can be initiated with mobile phone APP and AT
• Embedded TCP/IP protocol stack;
• Integrated TR switch/Balun/LNA/PA/antenna;
• MCU clock frequency up to 160M, internal cache 8kB;
• Integrated 16Mbitsflash;
• Supply voltage range: 4.75V~5.25VDC, single 5V is recommended to use.
• Support OTA firmware upgrade, which can be initiated with mobile phone APP and AT
command;
• Support STA, AP ,AP+STA mode;
• Support Smart Link;
• Support WEP/TKIP/WPA/WPA2 protocol;
• Support802.11e and WMM/WMM PS;
• Support UART;
• Support HT20/40;
• Support Smart Link;
• Support WEP/TKIP/WPA/WPA2 protocol;
• Support802.11e and WMM/WMM PS;
• Support UART;
• Support HT20/40;