Mingbo Education Technology Co. Ltd. ZWG81000B ユーザーズマニュアル

U-Class Z-wave IoT Gateway (ZWG81000B) User Manual

Method 2
Steps：
Step-1：Press the “+/-” key twice (each once about 1 second)

(ADD/DEL indicates blue and blink slowly until inclusion success or time-out)

Step-2：Trigger the new device which want to add-in

(Please refer to the manual of device to know how to trigger the inclusion. ADD/DEL indicator
will off once receive the message from device)

Notice

：

* Please perform “Exclusion” before “Inclusion” to erase old settings inside the device.

* Device must near by the Gateway when doing “Inclusion” (less than 3 meters)

6.5.2. Exclusion

Purpose：Remove the existing Z-wave device in the gateway
Method 1
Steps：
Step-1：Login Web Console on PC browser
Step-2：Click Device Management on the left of Web Console
Step-3：Click “Exclusion”

(ADD/DEL indicates green and blink slowly until exclusion success or time-out)

Step-4：Trigger the new device which want to remove

(Please refer to the manual of device to know how to trigger the inclusion. ADD/DEL indicator
will off once receive the message from device)

Method 2
Steps：
Step-1：Press and hold “+/-” key for 5 seconds, wait for indicator starts blink

(ADD/DEL indicates green and blink slowly until exclusion success or time-out)

Step-2：Trigger the new device which want to remove

(Please refer to the manual of device to know how to trigger the inclusion. ADD/DEL indicator
will off once receive the message from device)

Notice: