RBH Sound BT-100 ユーザーズマニュアル

•  Connect your self-powered 

subwoofer to SUB OUT.

•  Connect your CD player or 

other media player with an 

RCA cable to the AUX IN L/R 

input. Make sure you connect 

the “L” plug to the left input 

channel and the “R“ plug to 

the right input channel.

•  Connect an additional external 

amplifier with an 1.8-inch 

stereo cable to the LINE OUT.

•  Connect a portable device such as a phone, tablet or media player with an 1/8-inch stereo 

cable to LINE IN.

•  Connect your DVD player or other optical digital audio source with an SPDIF optical cable 

to the OPTICAL IN input.

•  Connect your speakers to the SPEAKERS OUTPUT. Make sure you connect the -/+ and the 

L/R cables to the correct output.

NOTE: Remember to select the desired source by either pressing the Volume Knob/Input 

Selector button or by aiming the remote control at the amplifier and pressing the desired 

source button. See illustration of remote control on previous page.

1.  Connect the power cord to the back of the amplifier then connect it to a power outlet. 
2.  Connect your devices to a suitable input, see the illustration above. 
3.  Turn the power switch to the On position; the unit will enter working status and the 

power indicator LED will turn orange and will default to the Bluetooth

®

 input when turned 

on for the first time. 

4.  Press the Bluetooth

®

, OPT, LINE or AUX button on the remote or press the amplifier’s 

volume knob to choose an audio source, see illustration of remote on the previous page.

5.  Control the playback via the remote control. 
 

WARNING: The amplifier will shut off automatically if the temperature exceeds 85°C, 

and the power indicator will turn orange. The amplifier will re-start automatically when 

the temperature has dropped below 60°C ±10°.

6.  To put the amplifier into standby mode, push the power button on the remote control or 

hold down the volume control knob on the amplifier for 2 seconds. The power LED will 

turn red. 

7.   To take the amplifier out of standby mode, push the power button on the remote or hold 

down the volume control knob for 2 seconds. The amplifier will default to last previously 

used input.

1.  Press the    Bluetooth

®

 button (



) on the BT-100 to switch to the Bluetooth

® 

input and 

activate pairing mode (Bluetooth

®

 input LED will flash quickly).

2.  Activate Bluetooth

®

 on your phone or tablet and scan for new Bluetooth® devices.

3.  When your phone or tablet finds “RBH BT-100”, choose this unit to begin pairing.

3

Connecting and Operating the Amplifier