Zimi Corporation WTX10 ユーザーズマニュアル
60 mm
60 mm
80mm
60 mm
60 mm
60 mm
Do not hard-press, crush, knock, drop, or apply any other
mechanical shock.
Do not disassemble or alter.
Do not place close to fire or toss into fire.
Do not expose to or submerge in liquids.
Do not use in extreme temperatures, humidity, or corrosive
environments, which may damage the circuitry and lead to
current leakage.
Do not place cards with magnetic stripes or IC chips, such as
ID cards, credit card, and bank cards, in the vicinity of this
wireless charging pad.
Keep medical implants, including but not limited to cardiac
pacemakers and cochlear implants, at least 1 foot (or 30.48
cm) away from the wireless charging pad in order to avoid
interference with the function of those medical implants.
Parental supervision is required to prevent children from
playing with the wireless charging pad and any hazards that
may result.
mechanical shock.
Do not disassemble or alter.
Do not place close to fire or toss into fire.
Do not expose to or submerge in liquids.
Do not use in extreme temperatures, humidity, or corrosive
environments, which may damage the circuitry and lead to
current leakage.
Do not place cards with magnetic stripes or IC chips, such as
ID cards, credit card, and bank cards, in the vicinity of this
wireless charging pad.
Keep medical implants, including but not limited to cardiac
pacemakers and cochlear implants, at least 1 foot (or 30.48
cm) away from the wireless charging pad in order to avoid
interference with the function of those medical implants.
Parental supervision is required to prevent children from
playing with the wireless charging pad and any hazards that
may result.
1. Connect the wireless charging pad to a compatible AC adapter
using the ZMI provided cable in the box. Then, the white LED
indictor light will flash on/off three times to indicate that the
wireless charging pad is ready.
using the ZMI provided cable in the box. Then, the white LED
indictor light will flash on/off three times to indicate that the
wireless charging pad is ready.
2. Place your wireless charging enabled device at the center of
the wireless charging pad. Then, charging will begin. While
charging is in progress, the white LED indicator light will stay on.
the wireless charging pad. Then, charging will begin. While
charging is in progress, the white LED indicator light will stay on.
A compatible AC adapter to be used with this wireless charging
pad must meet the following minimum requirements for
normal and fast charging, respectively:
a. The AC adapter should be capable of outputting 2A at 5V to
support wireless charging at 5W.
b. The AC adapter should be capable of outputting 2A at 9V
(Quick Charge 3.0) to support fast wireless charging at 10W.
pad must meet the following minimum requirements for
normal and fast charging, respectively:
a. The AC adapter should be capable of outputting 2A at 5V to
support wireless charging at 5W.
b. The AC adapter should be capable of outputting 2A at 9V
(Quick Charge 3.0) to support fast wireless charging at 10W.
Instructions
3. The center of the device being charged must be aligned with
the center of the wireless charging pad. You may need to adjust
the placement of the device until the device indicates normal
charging or the white LED indicator light stays on. (Please refer
to the following diagrams for proper placement of the device
relative to the wireless charging pad.)
the center of the wireless charging pad. You may need to adjust
the placement of the device until the device indicates normal
charging or the white LED indicator light stays on. (Please refer
to the following diagrams for proper placement of the device
relative to the wireless charging pad.)
4. When the red LED indicator light flashes, the wireless charging
pad is in an error state or in the protective mode. Check if a metal
object is placed on the wireless charging pad. If so, remove the
metal object and see if charging goes back to normal. Should the
red LED remain on after you have taken these actions, you would
need to contact our customer support (email: support@zmiusa.com,
phone: +1-844-828-2302) about the problem.
pad is in an error state or in the protective mode. Check if a metal
object is placed on the wireless charging pad. If so, remove the
metal object and see if charging goes back to normal. Should the
red LED remain on after you have taken these actions, you would
need to contact our customer support (email: support@zmiusa.com,
phone: +1-844-828-2302) about the problem.
Introduction
The ZMI LevPower
™ X Qi Wireless Charger works with wireless
charging enabled smartphones and tablets such as the iPhone 8/
8 Plus/X and Samsung Galaxy S6 and newer models. Its housing
is made of a metal shell and 2.5D toughened glass, giving it
a superior build and sleek texture, look, and feel. It is super
thin and easy to carry. The charger is also easy to use. Just
place your device over it and let the power flow without
cumbersome wires.
8 Plus/X and Samsung Galaxy S6 and newer models. Its housing
is made of a metal shell and 2.5D toughened glass, giving it
a superior build and sleek texture, look, and feel. It is super
thin and easy to carry. The charger is also easy to use. Just
place your device over it and let the power flow without
cumbersome wires.
USB-C
input port
Red LED
indicator light
White LED
indicator light
专色：PANTONE Cool Gray 11C
Be in charge, anytime, anywhere
7
8
6
5
3
4
2
1
18-Month Limited Warranty
The product has an 18-month limited warranty, unless the warranty
is voided by one or more of the following:
is voided by one or more of the following:
Unauthorized repair, incorrect use, drop, negligence, abuse,
liquid damage, accident, alteration, improper use with
non-ZMI-branded accessories, or removing or altering product
labeling
Warranty expiration
liquid damage, accident, alteration, improper use with
non-ZMI-branded accessories, or removing or altering product
labeling
Warranty expiration
ZMI USA Corporation, 120 San Lucar Ct, Sunnyvale, CA 94086-5213 USA
Customer Service
Web: zmiusa.com/support
Email: support@zmiusa.com
Phone: +1 (844) 828-2302
Email: support@zmiusa.com
Phone: +1 (844) 828-2302
For FAQs and more information, please visit:
zmiusa.com/support
@zmiusa
@zmiusa
@zmiusacorp
Warnings
FCC
This device complies with Part 18 of the FCC Rule
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Attention that changes or modification not expressly approved
by the party responsible for compliance could void the user
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Attention that changes or modification not expressly approved
by the party responsible for compliance could void the user
’s
authority to operate the equipment.
Note: This product has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
product generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this product does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for
help.
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
product generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this product does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for
help.
Specifications
Product Name
Model
Input
Output
Effective Distance
Operating Temperature
Dimensions
Weight
ZMI LevPower X Qi Wireless Charger
WTX10
5V=2A / 9V=1.6A
5V=1A / 9V=1.1A
8 mm (about 5/16 inch)
32
° to 104° F (0° to 40° C)
3.5×3.5×0.3 in (89×89×7.1 mm)
3.1 oz (89 g)
User Guide
Model: WTX10
ZMI LevPower X Qi Wireless Charger
Read this user guide carefully before use, and retain it for future
reference.
reference.
1
2