DONGGUAN ZHUNDIAN PLASTIC ELECTRONICS. LTD ZD9688 ユーザーズマニュアル

DONGGUAN ZHUNDIAN PLASTIC ELECTRONICS., LTD

Bluetooth movement

1.Bluetooth movement function:

1.1 Initial installation of the battery /RESET

      Install three clock hands on clock movement at 12:00 position, pull out the locating

needle above the battery, Put 2 pcs(1.5V AA alkaline) battery into the battery slot, Hour
minute 

second hand start returning to zero.

1.2 Reset clear receive

automatic time-chasing function

    Enter signal -received state after returning to
zero (receiving time less than 1 minute, three clock

hands at 12:00 position), when clock movement
receives signal, second hand start moving, Hour

minute hands begin to chasing time. If Hour

minute

second hands automatically move in 30 seconds, that

means clock movement did not receive signal.

1.3 Second-checking function

   Each time second-starting, second hand will enter
a mechanical second-checking action(time is 60 s).

2.Bluetooth movement button function: (see

Picture 1)