iMageTech Co. Ltd IMAGEMCU4035 ユーザーズマニュアル
iMageTech MCU4
Advanced settings
VCS wiring instructions (Cisco SX20, advision XT series)
VCS cable set is already included in the iMageTech MCU4 Wireless Meeting Speakerphone System product package, allowing you to connect to several frequently used VCS mode (Cisco SX20, Radvision
XT series) directly. The following are the wiring methods and the reference figure for the corresponding pins.
Please note that the wiring of this product must be performed by a professional engineer in order to avoid misconnection resulting in function failure.
XT series) directly. The following are the wiring methods and the reference figure for the corresponding pins.
Please note that the wiring of this product must be performed by a professional engineer in order to avoid misconnection resulting in function failure.
RESERVE
SLAVE
1
2
3
4
0
+
G
SOURCE
OUTPUT
INPUT
INDIVIDUAL
1
2
1
2
PAIR
CONSOLE
S0
S1
S2
S3
S4
RESERVE
SLAVE
1
2
3
4
0
+
-
G
SOURCE
OUTPUT
INPUT
INDIVIDUAL
1
2
1
2
PAIR
CONSOLE
S0
S1
S2
S3
S4
Connect Cisco to SX20
Audio Out
Connect Cisco to SX20
Audio In
Cisco SX20
Radvision XT series(XT5000, XT4200)
1. Cable required:
1. Cable required:
3.5mm (
4-pole
) to stripped wire
connector
3.5mm (
3-pole
) to stripped wire
connector
3.5mm (
3-pole
) to stripped wire
connector+RCA
3.5mm (
3-pole
) to stripped wire
connector+RCA
2. Wiring instructions:
Connect the
Connect the
“+ (positive)” and “G (ground)” of the stripped
wire connector
to the corresponding
iMageTech MCU4 Wireless Meeting Speakerphone System terminal
ports
; insert the 3.5mm
terminal directly into the Audio In/Out of Cisco SX20.
2. Wiring instructions:
Connect the
Connect the
“+ (positive)” and “G (ground)” of the stripped
wire connector
to the corresponding
iMageTech MCU4 Wireless Meeting Speakerphone System terminal
ports
; insert the 3.5mm
terminal directly into the Audio In/Out of Radvision XT series.
Connect Radvision to XT series
Audio Out
Connect Radvision to XT series
Audio In
-