Cardinal Health Commercial Technologies LLC FUSE005 ユーザーズマニュアル

1.  Place the Pod Pal device on a flat, level, stable surface 
   near a power outlet and the computer accessing the  
   InPower™ Pharmacy Software.
2.  Plug the power adapter into the Pod Pal while holding 
   the device.
3.  Plug the power adapter into a power outlet.
4.  Plug the USB cable into the Pod Pal while holding 
   the device.
5.  Plug the USB cable into the computer accessing the 
   InPower™ Pharmacy Software.
6  Refer to the InPower™ Pharmacy Software Learning 
   Manual for software use instructions. 

 •  Clean the exterior surfaces of the Pod Pal using a soft cloth,  
   an alcohol pad or a disinfectant wipe. 
 •  Do not use harsh chemicals to clean the device. 
 •  Do not immerse the device in any fluid or allow fluid to    
   enter through the USB or power adapter ports. 

 •  Do not attempt to service or repair the Pod Pal device. 
 •  Do not use if maintenance is required. 
 •  Do not dispose of the device. Return it to  
   Cardinal Health instead.

 •  If experiencing issues with the Pod Pal, try the following:
     o  Ensure the bottom of the pod is completely nested 
       against the pod bay.
     o  Refresh the Pharmacy Software screen.
     o  Disconnect the USB cable from the computer 
 

   and 

reconnect.

     o  Ensure the USB cable and power adapter are 
       completely plugged in
 •  If issues persist, contact Cardinal Health Technical Support  
   at 1-855-9IN-POWR (1-855-946-7697). 

1.  Power adapter input: Receives power from the wall  
   socket via the included AC/DC power adapter. Connect 
   one end of the power adapter to the wall and the other    
   end to the Pod Pal. Power specifications: ANS: Input:  
   120V AC 60Hz, Output: 5V DC 450mA. 

2.  USB input: Enables two-way communication between  
   the Pod Pal and the computer via the included USB cord.  
   Connect one end of the USB cord to the Pod Pal and the
   other end to the computer. 

3.  Pod bay: Place a medication pod inside the pod bay 
   when adding, checking or fixing fills. 

4.  Pod holder: Holds the pod properly in place. Ensure 
   the bottom of the pod is completely nested against 
   the pod bay.

5.  Cover: Hinged cover (lid) must be closed when weighing 
   pods during fills to ensure more accurate weight readings.
   The cover does not need to be closed during Check and 
   Fix Fill process, unless you are re-weighing the pods.  
   Keep the cover closed when the Pod Pal is not in use.