Sensio America LLC SA40698 ユーザーズマニュアル
3) Press any key on the remote controller to match successful.
2. How to realize group control on the remote controller (9-key controller).
1). Connect four groups of light bar at the output end of the controller and then power
on the controller.
on the controller.
2). First, press “ID learn key” on the controller. Then press “group 1” on the controller
and the first group can be matched successfully. If you want to add other groups in the
group, repeat above operation.
and the first group can be matched successfully. If you want to add other groups in the
group, repeat above operation.
3) Then, press the “ID learn key” on the controller. Then press “group 2” on the remote
controller to match the second group successfully. If you want to add other groups in the
group, repeat above operation. The group 3 and group 4 can be matched in the same
way.
controller to match the second group successfully. If you want to add other groups in the
group, repeat above operation. The group 3 and group 4 can be matched in the same
way.
4). There are four groups of controllers. If you want to control the first group, just press
“group 1” on the remote controller to carry out dimming operation for group 1; if you
want to control the second group, just press “group 2” on the remote controller to carry
out dimming operation for group 2; if you want to control group 1, 2, 3 and 4 together,
you may press the “group control switch” on the controller and can carry out dimming
operation for all controllers of the 4 groups.
“group 1” on the remote controller to carry out dimming operation for group 1; if you
want to control the second group, just press “group 2” on the remote controller to carry
out dimming operation for group 2; if you want to control group 1, 2, 3 and 4 together,
you may press the “group control switch” on the controller and can carry out dimming
operation for all controllers of the 4 groups.
3. How to cancel matched remote controllers
1) Power on the controller;
2) Hold down the key on the remote controller for 6 seconds to cancel the previously
matched controllers.
matched controllers.
Ⅳ. Color mode (equipped with 36-key remote controller)
1. Static red
2. Static green
3. Static blue
4. Static yellow
5. Static purple
6. Static cyan
7. Static white
5. Red-green jumping change
9. Red-blue jumping change
10. Green-blue jumping change
11. Yellow-cyan jumping change