Urban Canyon Flight Inc UC10X ユーザーズマニュアル
UC10x Installation Manual
URBAN CANYON FLIGHT INC
UC10X-001-IM REV02
CONFIDENTIAL & PROPRIETARY
PAGE 14 OF 69
5.4 FCC OEM Labeling Requirements for End-Product
The device is labeled with its own FCC ID Certification Number. In the event that the device is installed within
another device, and the FCC ID Certification Number is not visible, the end device into which the device is installed
must display a label referring to the enclosed certified transmitter. The final end product must be labeled in a
visible area with the following:
"Contains Certified Transmitter FCC ID: 2ANAE-UC10X"
or
"Contains FCC ID: 2ANAE-UC10X"
The OEM must only use approved antenna(s) listed above, which have been certified with the device.
5.5 FCC OEM End-Product User Manual Statements
The OEM integrator should not provide information to the end user regarding how to install or remove this RF
certified transmitter or change RF related parameters in the user manual of the end product.
Other user manual statements may apply.
Compliance statement only valid if used with certified/approved antenna or antenna types. See list of approved
antenna(s)/antenna characteristics.
Label must be placed on enclosure exterior and must be clearly visible.
5.6 FCC-Compliant Antenna & Cable
5.6.1 Minimum Cable Loss
The minimum cable loss is 0 dB (direct connection to antenna).
No external amplifier is allowed.
5.6.2 Maximum Cable Loss
The maximum cable loss is 1.5 dB.
5.6.3 Antenna Gain
Antenna Information: 1030-1090 MHz, linearly-polarized antenna, Gain: 5.2 dBi max
3
.
3
See section 11.4 Antenna for more information on antenna requirements.