CJ Global Inc. 72796 ユーザーズマニュアル

无线&无限

72796
无线充电台灯

用户手册

产品介绍

产品外观

TYV-1754款无线充电台灯是一款造型美观时尚产品，设计简单大方，台灯光
源采用二次光学技术，光线柔和均匀无暗斑叠影。采用高效光，高显色指数，长寿
命LED光源，使用先进的恒流技术驱动,无频闪, 保护视力。本台灯高度可再40厘米
范围里任意调节，灯头可上下120度调节，方便用户调整到最佳使用位置。
无线发射模块可与任何Qi标准的手机及设备兼容。充电设备无线插拔，方便
快捷。为你提供无束缚的生活体验，享受自由、安全的无线充电体验。
同时提供USB线充接口，以便给没有无线接收的手机或设备充电。

USB输入
9V/3A输入

无线充电适用设备

使用说明

1.设备内置无线充电接收装置（三星56、诺基亚1520、LG NEXUS5等）
2.备有预留无线充电接口，需安装接收器线圈（三星Ga|aXy S5、三星Galaxy Note4等）
3.需要安装带有接收装置保护套的设备（iPhone5, iPhone6/Plus等）

(注：这些接收装置需符合WPC Qi标准才能兼容使用）

配件清单

TYV-1754无线充电台灯
9V/3A电源适配器
用户手册

产品规格

输入：PD.9V/3A
台灯输出：10W
LED数量：34颗5730暖灯
显色指数：80max
中心照度：8001 ux色温
色温：2800&3200K
光源寿命：50000小时
无线充电输出：10W
传输距离:≤8mm
充电效率：≥76%
尺寸：长180mmX 宽 120X 高 567mm
重量：600g

注意事项

1.为保证使用效果，请务必使用输出在PD.9V/3A的电源适配器及优质线材。

2.请特别注意，无线充电，USB线充及台灯功能，不可以同时使用，只能同时

使用两种坊能。

3.请保持充电器和接收装置远离水和其他液体。

4.如需清洁充电器，请确保和电源断开。

5.使用环境温度保持在0 _45°C

另外，

1.将PD电源Micro USB口插入台灯的电源输入口。（如下图所示）

2.通电后即可按前页按键功能示意图使用台灯

注意除亮度加，亮度减是长按操作外，其他按键都是短按操作。

3.把带有无线充电接收装置的设备，放置在台灯无线充电器上，注意接收线圈中心需与

台灯无线充电器标示中心位置对准，即可随放随充。充电时充电指示灯会打幵并呼吸
闪烁。拿开充电设备后，指示灯关闭。

4.使用线充时，将USB充电线一端插入台灯尾部的USB口，另外一端与手机相连即可。

(如下图所示）

WIRELESS&LIMITLESS

User Manual

Introdution

Outline

TYV-1754 wireless charging desk lamp is an intelligent product. Simply designed, it
gives out great l.ghts with different color temperature. Also, it has built-in wireless
charger which's compatible with any Qi-standard phones and devices. Besides, it
is integrated with USB output function which makescharging mush easier.
Now enjoy a simple and free life with this multi-functional desk lamp!

USB Output Port
9V/3A Input Port

Wireless Charging Applicable Devices

How to Use

1 Devices with built-in wireless charging receiver (Samsung S6,Nokia 1520,LG,Nexus5)
2.Devices with reserved wireless charging interface beside its battery (Sansung Galaxy
S3, S4, S5, Note2, Note3, Note4, etc).
3.Devices with wireless charging receiver in its protection case (iphone5/5s,iphone6,
iPhone6 plus, etc).

Accessories

TYV-1754 Wireless Charging Desk Lamp
9V/3A PowerAdaptor
User Manual

Specifications

Input: PD.9V/3A
Desk Lamp Output: 10W
LED Qty: 34pcs x 5730warm light
CRI: 80max
Center Luminance: 800lux
Color Temperature: 2800&3200K
LED Longevity: 50000hrs
Wireless Charging Output: 10W
Transferring Distance: ≤8mm
Efficiency ≥76%
Size: L 180mm x W120 x H567mm
Weight: 600g

Notes

1.To ensure using effect, please use an PD adaptor and good quality cable.
2.Among three functions of wireless charging, USB output and desk lamp. Only two

functions can be used at same time.

3.Please keep it away from water or other liquid.
4.Power off the item before it is cleaned.
5.Keep the working temperature at 0-45 °C.

Note: All devices must be Qi standard.

1. Power the product by using an PD power adaptor(see below).

2. Refer to the functions of each button in previous page(Outline) to use the lamp.

Short press is required to adjust the functions except that brightness increase
and decrease need long press.

3.When using the wireless charging function, place phones with Qi receiver onto the
wireless charging aera.At this time,the wireless charging indicator turns on and flicker
to indicate that wireless charging works properly. The indicator turns off after the phone
is removed.

4. To charge a digital device, use a piece of charging cable to connect the USB output port

of desk lamp with the charging port of the device (see below).

72796
desklamp wireless charger

Front

Back

无线充电指示灯

1小时定时开关

2小时定时开关

灯光调节

电源键

亮度加

亮度减

Wireless Charging
Indicator

1Hour Poweroff

2Hour Poweroff

Lighting adjustment

Power On/Off

Brightness Increase

Brightness Decrease

FCC Statement

Changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to

operate the equipment.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is

subject to the following two conditions (1)this device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

IC Statement

This device complies with Industry Canada’s licence-exempt RSSs.

Operation is subject to the following two conditions:

ÿ(1) This device may not cause interference; and

ÿ(2) This device must accept any interference, including interference

ÿthat may cause undesired operation of the device.

The term “IC: “ before the certification/registration number only signifies

that the Industry Canada technical specifications were met. This

product meets the applicable Industry Canada technical specifications.

Le présent appareil est conforme aux CNR d'Industrie Canada applicable

aux appareils radio exempts de licence. L'exploitation est autorisée aux

deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage,

et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique

subi, même si le brouillage est susceptible d'en compromettre le

fonctionnement