Avatar Wireless Power Shenzhen Co. Ltd AFD-1622-FTXP ユーザーズマニュアル
Operation
1. Connect wall power adaptor to wireless charger by power cable. Indicator blinks twice when
power is on. Then LED turns off and the charger is standby.
2. Put a phone that has Qi receiver built inside on the charger center induction area. The
receiver normally locates in back center of the phone. The indicator gradually changes its
brightness circularly when it is charging the phone. Wrong distance or metal object detected
on the charger pad will cause error, and indicator blinks quickly. Please set the phone
position again.
brightness circularly when it is charging the phone. Wrong distance or metal object detected
on the charger pad will cause error, and indicator blinks quickly. Please set the phone
position again.
3. When phone is full, the charger will charge in trickle or stop based on phones power
management system. It doesn’t hurt the phone battery.
Accessories
Cable x 1
Manual x 1
Wireless Charger x 1
Manual x 1
Wireless Charger x 1
Specifications
Input: 5V 2A & 9V 1.67A(10W optional)
Output: 5V 1A & 9V 1.1A(10W optional)
Induction Distance: 3‐6mm
Transfer Efficiency>80%
Output: 5V 1A & 9V 1.1A(10W optional)
Induction Distance: 3‐6mm
Transfer Efficiency>80%