Polygroup Trading Limited 1701 ユーザーズマニュアル

MADE IN CHINA

2

Grow and Stow tree is an indoor Christmas Tree provided with a electromechanical system for multiple 

height adjustment. Powered by a switching power supply (adaptor), It can be control by a foot pedal and a 

RF remote control unit. This controller commands the mechanism for stow and deploy, as well as the 

lighting functions. The full lower section of the motorized tree is provided with quick set connectors, and 

this entire tree easily storages within a compact bag for convenient storage.

Foot Pedal, Remote hand set, adaptor, power cord, owner manual

Input AC110-240V, 50/60Hz, Output DC 29V/2A

Minimum: 6ft
Maximum: 7.5ft
Stroke: 1.5ft

Minimum: 7ft
Maximum 9ft
Stroke: 2ft

3000 Cycles Max.

33 ft (10m) 

DC 3V 

0

o

C to 40

o

C, 85% Humidity, indoor use

-5

o

C to 60

o

C,  85% Humidity

a) Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or 

    frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections or 

    exposed copper wire.

b) When storing the product, carefully remove the product from wherever it is placed, including trees, 

    branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, 

    and wires.

c) When not in use, store neatly in a cool, dry location protected from sunlight.

Step 2: Lift up to 

unsnap locking

tab, then pull lamp 

and plastic base 

straight out of 

lampholder.

Step 1: Grasp plug 

and remove from the

receptacle or other 

outlet device. Do not

unplug by pulling on 

cord.

Step 3: Replace lamp

with only 3.6 Volt, 

0.072 watt or 2.4 Volt,

0.048 Watt LED type 

lamps provided with 

this product.

(Reference figure only)

If the new lamp base does not fit in lamp holder, follow 

the step below before Step 3.

a) Remove the base or burned out lamp by straightening 

    lamp leads and gently pull lamp out.

b) Thread leads of new lamp through holes in old base   

    with one lead in each hole.

c) After lamp is fully inserted into base, bend each lead 

    up, like other lamps in the light set so that the leads 

    will touch the contacts inside the lampholder.

                                 

1. Risk of fire. This product dose not contain lamp shunts, which allow the product to operate if one 

    lamp burns out.Replace lamps only with the spare lamps provided wiht this product.

2. To reduce the risk  of fire and electric shock: a) Do not install on trees having needles, leaves or 

    branch coverings of metal or materials which look like metal, and b) Do not mount or support 

    strings in a manner that can cut or damage wire insulation .