Polygroup Trading Limited 1701 ユーザーズマニュアル
ASSEMBLY INSTRUCTIONS
MADE IN CHINA
5
Unpack Carton box
Tree Assembly
1.1 Place the tree box on an upright position
(long side along the vertical direction).
See the arrows marked on the box for reference.
1.2 Untie the wrap string around the carton box,
knife or cutter may be required (not included).
1.3 Pull up the top carton cover by the side hole handles
(one on each side of carton box).
1.4 Remove the tree head section out of the box and
open the tree head bag.
1.5 Remove the foam pads under the front wheels of
the stand (swiveling casters Fig 1). The hard board
under the stand will tip down creating a slight slope.
1.6 Pull the tree out of the carton box carefully.
1.7 Unlock the buckles on the tree bag, and loose the
tree bag rope.
1.8 Open the tree bag wide and pull it up from the top
of the tree.
2.1 Open and remove the protective cap from the top of the funnel
guide before inserting the tree top section .
2.2 Inserts the tree top section into top funnel gide of main
section (see Fig 2)
Wire Connection
Fig 3
12
14
12
14
3.1 All accessories are stored in a small pouch , attached near the tree wheel stand. Open the pouch and
put all accessories ready for use. (all wires display as seen on fig 3)
3.2 Connect the 2pin and 4pin connectors coming from the base of the tree to their counterpart connectors
on the foot pedal (As shown on fig. 3). Make sure to lock them by turning the sockets.
3.3 Plug the pedal 2 pin connector into the DC Power Adaptor output jack .Turn and lock
with the socket.
3.4 Plug the Power adaptor AC cord into an AC outlet.
3.5 The tree is energized and ready to be operated.
19
4
1
28
SET UP INSTRUCTION
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
PULL
HERE
PULL HERE
PULL
HERE
Fig 1
Fig 2
1
2