Fiber Mountain Inc SENFG1MA ユーザーズマニュアル
© Copyright 2018, Fiber Mountain, Inc. All Rights Reserved
9
Sensus Installation Manual
150-00006 Rev 5
Laser
WARNING:
Laser Warnings: Laser output may be hazardous if viewed with magnifying optics.
Laser Warnings: Laser output may be hazardous if viewed with magnifying optics.
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare
into beams or view directly with optical instruments.
Class I (21 CFR 1040.10 and 1040.11) and Class 1M (IEC 60825-1 2001-01) laser products.
Statement 291
Cables
• Always disconnect all power cables before servicing this product.
• Always pull on the plug or the connector to disconnect a cable. Never pull on the cable
• Always pull on the plug or the connector to disconnect a cable. Never pull on the cable
itself.
• Do not walk on or place stress on cables or plugs.
Factory Service
• Refer service only to service personnel who are authorized by the manufacturer.
Read and Retain Instructions
• Carefully read all safety and operating instructions before operating this equipment, and
retain them for future reference.
Follow Instructions and Heed Warnings
• Follow all operating and use instructions. Pay attention to all warnings and cautions in the
operating instructions, as well as those that are affixed to this equipment.
Terminology
The terms defined below are used in this document. The definitions given are based on those
found in safety standards.
Service Personnel - The term “service personnel” applies to trained and qualified individuals
who are allowed to install, replace, or service electrical equipment. The service personnel are expected
to use their experience and technical skills to avoid possible injury to themselves and others due to
hazards that exist in service and restricted access areas.
to use their experience and technical skills to avoid possible injury to themselves and others due to
hazards that exist in service and restricted access areas.