Mobius Mobility LLC 22007 ユーザーズマニュアル
STEP SHAPE AND SIZE
REQUIREMENTS
REQUIREMENTS
•
The Rise (height) of each step must be 5 - 8 in
(127 - 203 mm).
(127 - 203 mm).
Note: Risers are not required, as long as the
stair height is within specifications and are in
good condition.
stair height is within specifications and are in
good condition.
•
The Tread (depth) of each step must be 10 -
17 in (254 - 432 mm) from front to back.
17 in (254 - 432 mm) from front to back.
WARNING
Only climb steps that are flat and level. Avoid sloped stairs,
as they may cause the wheels to roll forward on the step.
Climbing sloped steps can cause the wheels to fall off the
stair.
as they may cause the wheels to roll forward on the step.
Climbing sloped steps can cause the wheels to fall off the
stair.
If you ever have a question about the size of a
step you are approaching, you can use drive
wheel tire diameter as a
step you are approaching, you can use drive
wheel tire diameter as a
ruler. This will help you
estimate the stair geometry. The diameter of
drive wheel tires is approximately 12 in (305
mm).
drive wheel tires is approximately 12 in (305
mm).
WARNING
Never face up the staircase when climbing stairs. The device
is designed to go up and down stairs safely, only when your
feet are facing down the staircase. Climbing stairs while facing
up the staircase will cause the device to tip over. Personal
injury or death could result.
is designed to go up and down stairs safely, only when your
feet are facing down the staircase. Climbing stairs while facing
up the staircase will cause the device to tip over. Personal
injury or death could result.
D
riv
in
g
M
o
d
e
s
a
n
d
T
e
c
h
n
iq
u
e
s
98
DKPX-09006-001-Rev. 1.7