Mobius Mobility LLC 22007 ユーザーズマニュアル
M
a
in
te
n
a
n
c
e
ARMREST HEIGHT
To change the height of the armrest, use a 5 mm
hex wrench. Remove the two bolts located on the
side of the armrest. Move the armrest to the
desired position, align holes, reinsert the bolts
and tighten.
hex wrench. Remove the two bolts located on the
side of the armrest. Move the armrest to the
desired position, align holes, reinsert the bolts
and tighten.
ARMREST FORWARD/BACK
The armrest pad can be positioned either more
forward or back depending on positioning needs.
forward or back depending on positioning needs.
To adjust, unzip the upholstery underneath the
armrest. Using a 5 mm hex wrench, loosen the
two bolts on the underside of the upper armrest
tube.
armrest. Using a 5 mm hex wrench, loosen the
two bolts on the underside of the upper armrest
tube.
Do not remove: one to two turns is sufficient to
adjust. Move the armrest pad to the desired
position and tighten the two bolts.
adjust. Move the armrest pad to the desired
position and tighten the two bolts.
DKPX-09006-001-Rev. 1.7
147