Mobius Mobility LLC 22007 ユーザーズマニュアル
3. If the user controller is unresponsive, press
the POR Button on the front of the power
base to power OFF.
base to power OFF.
If you are in Balance mode, the device will
perform a controlled automatic transition to
4-Wheel mode before powering off.
perform a controlled automatic transition to
4-Wheel mode before powering off.
4. Power ON using the power button on the
user controller.
5. If the communication lost icon reappears,
disconnect and reconnect the user
controller cable and try again to power ON.
controller cable and try again to power ON.
6. If the condition persists, Power OFF, unlock
the freewheel lever (brake release) and have
the device manually pushed.
the device manually pushed.
7. For further assistance, contact Technical
Support.
DISPLAY FROZEN
If your user controller display is unresponsive to
commands, you will need to power cycle the
device.
commands, you will need to power cycle the
device.
Note: If you are in Balance mode follow
instructions from
instructions from
Communication Lost to
transition onto four wheels.
WARNING
Operating the Forced Power OFF when in Balance or Stair
mode can cause the device to fall over.
mode can cause the device to fall over.
The device will fall unless someone is capable of keeping it
upright in Balance mode or you or your assistant can hold onto
the handrail or assist handle in Stair mode.
upright in Balance mode or you or your assistant can hold onto
the handrail or assist handle in Stair mode.
1. Press and HOLD the Menu button for ten
seconds to go directly to the
FPO icon.
T
ro
u
b
le
s
h
o
o
tin
g
172
DKPX-09006-001-Rev. 1.7