Fanvil Technology Co. LTD. I30 ユーザーズマニュアル
[键入文字]
17
/ 54
Auto Provision
Field Name
Explanation
Common Settings
Current Configuration Version
Show the current config file’s version. If the config file to be
downloaded is higher than current version, the configuration would
be upgraded. If the endpoints confirm the configuration by the
be upgraded. If the endpoints confirm the configuration by the
Digest method, the configuration would not be upgraded unless it
differs from the current configuration
General Configuration Version
Show the common config file’s version. If the configuration to be
downloaded and this configuration is the same, the auto provision
would stop. If the endpoints confirm the configuration by the Digest
method, the configuration would not be upgraded unless it differs
method, the configuration would not be upgraded unless it differs
from the current configuration.
CPE Serial Number
Serial number of the equipment
Authentication Name
Username for configuration server. It is used for FTP/HTTP/HTTPS. If
this is blank, the phone would use anonymous access
Authentication Password
Password for configuration server. It is used for FTP/HTTP/HTTPS.
Configuration File Encryption Key
Encryption key for the configuration file
General Configuration File
Encryption Key
Encryption key for common configuration file
Save Auto Provision Information
Save the auto provision username and password in the phone until
the server url changed
the server url changed
DHCP Option
Option Value
The equipment supports configuration from Option 43, Option 66,
or a Custom DHCP option. It may also be disabled.
or a Custom DHCP option. It may also be disabled.
Custom Option Value
Custom option number. It must be from 128 to 254.
SIP Plug and Play (PnP)
Enable SIP PnP
If it is enabled, the equipment would send SIP SUBSCRIBE messages
to the server address when it boots up. Any SIP server compatible
with that message would reply with a SIP NOTIFY message
containing the Auto Provisioning Server URL where the phones can
request their configuration.
Server Address
PnP Server Address
Server Port
PnP Server Port
Transportation Protocol
PnP Transfer protocol – UDP or TCP
Update Interval
Interval time for querying PnP server. Default is 1 hour.