Launch Tech Inc. GEARSCAN ユーザーズマニュアル

ii

                                                                   GEAR SCAN User's Manual

•  Other product names used herein are for identification purposes only and 

may be trademarks of their respective owners. LAUNCH disclaims any and all 

rights in those marks. 

•  There is a possibility that this unit is inapplicable to some of the vehicle 

models or systems listed in the diagnosis section due to different countries, 

areas, and/or years. Do not hesitate to contact LAUNCH if you come across 

such questions. We are to help you solve the problem as soon as possible.

•  To take full advantage of the unit, you should be familiar with the engine.
•  All information, illustrations, and specifications contained in this manual are 

based on the latest information available at the time of publication. The right 

is reserved to make change at any time without notice.

•  Neither LAUNCH nor its affiliates shall be liable to the purchaser of this unit 

or third parties for damages, losses, costs or expenses incurred by purchaser 

or third parties as a result of: accident, misuse, or abuse of this unit, or 

unauthorized modifications, repairs, or alterations to this unit, or failure to 

strictly comply with LAUNCH operating and maintenance instructions. 

•  LAUNCH shall not be liable for any damages or problems arising from the 

use of any options or any consumable products other than those designated 

as Original LAUNCH Products or LAUNCH Approved Products by LAUNCH. 

To prevent personal injury or damage to vehicles and/or the GEAR SCAN, 

please read this user’s manual first carefully and observe the following safety 

precautions at a minimum whenever working on a vehicle:
•  Always perform automotive testing in a safe environment.
•  Do not attempt to operate or observe the tool while driving a vehicle. 

Operating or observing the tool will cause driver distraction and could cause a 

fatal accident.

•  Wear safety eye protection that meets ANSI standards.
•  Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or 

hot engine parts.

•  Operate the vehicle in a well-ventilated work area: Exhaust gases are 

poisonous.

•  Put blocks in front of the drive wheels and never leave the vehicle unattended 

while running tests.