Bogen RIO1S プリント

Bogen’s RIO

1S is a multi-functional module with a priority-controlled relay contact, transformer-balanced input,

transformer-balanced output, and an RJ

11 output for direct connection to the override input of a zone paging 

system.

The RIO

1S provides a convenient way to integrate a Power Vector amplifier with a PCM zone paging system,

allowing full use of the Power Vector’s priority structure in zone paging applications for more sophisticated 
paging capabilities.

•

Transformer-isolated, balanced line-level input

•

600-ohm or 

10k-ohm (jumper selectable) input

impedance

•

Transformer-isolated, balanced line-level output

•

8-ohm, 0.75W output

•

Input and output level controls

•

Relay responds to jumper selectable priority level

•

N.O. or N.C. jumper-selectable relay contact

•

External control of priority muting buses

•

Input can be muted from higher priority modules,
with signal fade back

•

Output (normally gate) can be synched with 
priority relay operation

•

Output gating can be defeated via jumper

•

RJ

11 connection with line output and dedicated

N.O. relay contact (allows easy connection to O/R
port of Bogen telephone paging interfaces)

Specifications subject to change without notice.
© 2004 Bogen Communications, Inc.
Part No. 54-80

19-01C  0705

• Jumper-selectable, transformer-balanced output with

gain and priority gating (synched with prioritized
relay)

• Specialized PCM2000 / Page Port-type output with

audio signal and dedicated N.O. contact (RJ

11 jack)

• Prioritized Relay (N.O. or N.C. contact) allows 

external devices to be activated when specific priority
levels are met

• External control of priority mute buses

• Transformer-balanced (600-ohm or 

10k-ohm) input

with gain and defeatable priority mute

1

2

3
4

5

6

Enabled

Disabled

Gate

Relay

Out (–)

Out (+)

Relay