NIE Technology Co. Ltd ZW47 ユーザーズマニュアル

USER MANUAL

Z-Wave on/

ontrol of 2 electrical devices

On/

ging/charged) reports from USB port to the hub (no Z-

Wave control) - turn the charging device for best results

Energy monitoring for each outlet

Smart LED indicator displays power use and Z-Wave signal strength

Built-in overload protection and ETL certification

Z-Wave Plus signal repeater to extend network range

S2 security and 500 Z-Wave chip for reliable wireless communication

Model Number: ZW47

Z-Wave Signal Frequency: 908.42 MHz

Power: 120 VAC

Maximum Load: 10 A total (between 2 outlets)

Maximum Load for USB port: 2.1 A

Range: Up to 100 feet line of sight

Installation and Use: Indoor only

FEATURES

SPECIFICATIONS

CAUTION

This is an electrical device - please use caution when installing and
operating the Double Plug. Remote control of appliances may result in
unintentional or automated activation of power. Do

NOT use this Z-Wave

device to control electric heaters or other appliances which produce the
risk of fire, burns, or electrical shock when unattended.

INSTALLATION

Plug the Double Plug into any standard grounded 110 V receptacle. Do
NOT connect any devices to the plug at this point. Click the Z-Wave
button

once to turn on the

outlet and

double-click it to turn the

right outlet on. See if the LED indicators c

. If the LED

indicators don’t light up at all, please tr

erent receptacle. If they’re

, please make sure the Double Plug is on.

BEFORE YOU PLUG ANYTHING IN

e sure the load you are about to connect does NOT e c

in power. This

can hold up to 10 A in total. It means that the

Double Plug

power of all devices connected to your ZEN25 at a given time can NOT
exceed 10 A. It doesn’t matter if this is just one device connected to one
of the outlets or 2 small appliances plugged into both outlets.
Connecting heavy duty equipment to this Double Plug will D

the device and may cause the connected appliance to malfunction.

DON’T USE WITH

OK. TO USE WITH

Washers

Dryers

Refrigerators

Electric heaters

Fans

Pumps

Chargers

Routers

Floor Lamps

Tv’s and Video

Computers

Game Consoles

Alarm Clocks

Printers

Speakers

Audio Players

This product should be installed indoors upon completion of any building
renovations.

Prior to installation, the device should be stored in a dry, dust-and-mold-
proof place.

Do not install the Double Plug in a place with direct sun exposure, high
temperature, or humidity.

Keep away from chemicals, water, and dust.

Ensure the device is never close to any heat source or open flame to prevent
fire.

Ensure the device is connected to an electric power source that does not
exceed the maximum load power.

No part of the device may be replaced or repaired by the user.

WARNING

1. Bring the plug within direct range of your Z-Wave gateway (hub).
2. Put the Z-Wave hub into exclusion mode.
3. Press and release the Z-Wave button 3 times quickly.
4. Your hub will confirm exclusion and all of the channels (child outlets)

and the main device will disappear from your controller's device list.

EXCLUSION (REMOVING / UNPAIRING DEVICE)

FACTORY RESET

TROUBLESHOOTING

The Double Plug won’t add to your system? Try this:

1. Initiate

EXCLUSION and click the Z-Wave button 3 times quickly.

2. Click the Z-Wave button

4-5 times quickly when adding it.

3. Bring the Double Plug

closer to your hub, it may be out of range.

4. Double-check if the device is powered.

If your primary controller is missing or inoperable, you may need to reset
the device to factory settings. To complete the reset process manually,
click-click-click’n

-Wave button for at least 0 seconds.

NOTE: All previously recorded activity

EXCEPT for

and custom settings

the kWh record will be erased from the device’s memory

Wave butt

o reset the kWh record fr

outle

o reset the kWh record from the right outlet.

WARRANTY

This product is covered under a 12-month limited warranty.

FCC NOTE
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIPMENT. STORE INDOORS WHEN NOT IN USE. SUITABLE
FOR DRY LOCATIONS ONLY. DO NOT IMMERSE IN WATER. NOT FOR USE WHERE DIRECTLY EXPOSED
TO WATER.

MANUAL INCLUSION

2. POWER the Double Plug

ADD DEVICE to your hub (AUTO INCLUSION)

Initiate inclusion (pairing) in the app (or web

interface).

Plug the device into a grounded 120 VAC receptacle

you’re planning to use it at (it doesn’t need to be close

Put your Z-Wave hub into inclusion mode and

-Wave butt

quickly.

-WAVE BUTTON

to the hub). The LED indicators will start blinking and the Double Plug will
join the network automatically. If it lights up in yellow, inclusion has failed.
3. You will see 4 new on/

vices in your app: 2 channels for on/

ontrol,

1 channel for on/

monitoring (the USB port reporting charging/ charged

status, no control), and 1 master node to control both outlets at the same
time and to access and adjust advanced settings in (if your hub supports
parameter input).

USB PORT

No light / Whit
Cyan = 200 – 400 W
Orange = 600 – 800 W
Purple = 1000 – 1200 W

Blue = 0 – 200 W
Green = 400 – 600 W
Red = 800 – 1000 W
Purple blink = over 1200 W

LED INDICATOR

How to read LED indicator colors?

The LED indicators on your Double Plug will visually report power use and
Z-Wave range (see next page for range test details).

Z-WAVE CONTROL

FCC Caution.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates uses

and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the

following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

connected.

-Consult the dealer or an experienced radio/TV technician for help.

*RF warning for Mobile device:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environ-

ment. This equipment should be installed and operated with minimum distance 20cm between the

radiator & your body.

ZW47

S2 Double Plug with USB Port