Zhejiang Shunkang Technology Industry Co. Ltd WDJ7052 ユーザーズマニュアル
Instruction Manual
First use
Basic cleaning
‐Remove the packaging material and all protective foils.
‐Clean all parts of the barbecue thermometer before first use as described in the chapter
“Cleaning”.
‐Clean all parts of the barbecue thermometer before first use as described in the chapter
“Cleaning”.
Assembling the digital BBQ thermometer
1. Check whether the package contents are complete and that the parts of the barbecue
thermometer are undamaged.
2. Sort all parts of the barbecue thermometer as indicated on the fold‐out page of the assembly
instructions.
3. Take the receiver, open the cover of the battery compartment and insert 2x AAA batteries in
the battery compartment with the indicated polarity.
4. Close the battery compartment and switch the receiver on with the switch (ON). Once the
indicator appears on the display of the receiver, the receiver is operational.
5. Take the base unit and open the battery compartment on the bottom of it. Insert 2x AAA
batteries in the battery compartment with the indicated polarity.
6. Close the battery compartment and switch the base unit on with the switch (POWER ON).
7. Take the temperature sensor and insert the plug at the end of the transmission cable in the
7. Take the temperature sensor and insert the plug at the end of the transmission cable in the
jack of the base unit.
The power indicator on the base unit will illuminate.
The barbecue thermometer is now operational.
The power indicator on the base unit will illuminate.
The barbecue thermometer is now operational.
8. Push various buttons to test whether all functions of the barbecue thermometer are
accessible.
9. Switch the receiver and the base unit back off. Affix the enclosed fastening clip for attaching
it to clothing (bag, belt) to the receiver and affix the enclosed Velcro strip to the base unit to
attach it to the place of use (barbecue).
attach it to the place of use (barbecue).
NOTICE!
As soon as the base unit has been switched on and the temperature sensor is connected with the
base unit, the current temperature will appear as CURRENT TEMP on the display of the receiver.
If no current temperature is shown, check whether the connector plug of the temperature sensor
has been correctly inserted in the jack of the base unit.
base unit, the current temperature will appear as CURRENT TEMP on the display of the receiver.
If no current temperature is shown, check whether the connector plug of the temperature sensor
has been correctly inserted in the jack of the base unit.
Operation
Prepare the digital BBQ thermometer in accordance with the instructions for first‐time use.
Switch the receiver and the base unit on and connect the temperature sensor to the base unit.
Switch the receiver and the base unit on and connect the temperature sensor to the base unit.