LEXIN ELECTRONICS INC LXFT4 ユーザーズマニュアル
5
If you are installing into an open face helmet, attach the microphone to the velcro pad,
and adjust the direction of the microphone so that the triangular mark on the
microphone is pointing towards your mouth. Use the boom microphone holder to fix
the microphone if necessary.
and adjust the direction of the microphone so that the triangular mark on the
microphone is pointing towards your mouth. Use the boom microphone holder to fix
the microphone if necessary.
3.3 Place the speakers into the helmet’s inner padding. Push the speakers and
microphone firmly against the Velcro pads. If the helmet has deep ear pockets, you
can use the speaker pads to place the speakers closer to your ears.
microphone firmly against the Velcro pads. If the helmet has deep ear pockets, you
can use the speaker pads to place the speakers closer to your ears.
3.4 Press the wires into the gap between the helmet liner and shell.
Note: The speaker with shorter wire is for the left ear and the speaker with the
longer one is for the right ear, to enhance the FM radio reception as well.
3.5 Mount the LX-FT4 main unit on the bracket. Attach the top first, then slide the
main unit down onto the bracket until it clicks firmly into the bottom portion of the
bracket.
longer one is for the right ear, to enhance the FM radio reception as well.
3.5 Mount the LX-FT4 main unit on the bracket. Attach the top first, then slide the
main unit down onto the bracket until it clicks firmly into the bottom portion of the
bracket.