Lenovo SFPLJ2208W1 ユーザーズマニュアル

85

If the machine is operating but paper will not feed or paper jams occur frequently, check 
the condition of the machine and paper.

Problems

Solutions

Paper does 

not feed 

smoothly

•   Use only supported paper types. Refer to 

Media for the supported paper types.

•   Load paper correctly, making sure that the paper guides are 

properly adjusted.Refer to 

Chapter 2: Setting up the Printer 

for Loading Paper.

•  If the paper is curled, straighten the paper.
•   Take out the paper from tray and fan it well. Then,reverse the 

top and bottom of the paper, and put it in the tray.

Frequent 

jams

•   If there are gaps between the paper and paper guides, adjust 

the guides to remove the gaps.

•   Avoid printing on both sides of the paper when printing images 

that contain large areas of solid color, which consume a lot of 
toner.

•   Use only supported paper types. Refer to 

Media for the supported paper types.

•   Load paper only as high as the upper limit markings on the 

paper guide.

Multiple 

sheets of 

paper are fed 

at one time

•   Fan the stack of paper well before loading it in the tray. Make 

sure that the edges are even by tapping the stack on a flat 
surface such as a desk.

•  Make sure that the paper guides are in the right position.
•   Use only supported paper types. Refer to 

Media for the supported paper types.

•   Load paper only as high as the upper limit markings on the 

paper guide. 

•   Check that paper was not added while there was still some left 

in the tray. Before adding new paper, remove the remaining 
paper from the feed tray and add them to new stack, fan the 
paper again ,then put it in the tray..

Paper gets 

wrinkles

•  Paper is damp. Use only paper that has been stored properly. 
•   Paper is too thin. Refer to Chapter 3: Print Media for the 

supported paper types.

•   If there are gaps between the paper and the paper guide, 

adjust the paper guides to remove the gaps.