WINLITE INTERNATIONAL LTD D40 ユーザーズマニュアル
NOTE:
·If no device connected and no Bluetooth connection within 10 minutes, the speaker
will automatically switch to standby mode. To exit the speaker from standby mode,
push the On/Off switch to OFF and then back to ON.
push the On/Off switch to OFF and then back to ON.
·If you switch the speaker off, after switching it on again you will need to re-establish
the Bluetooth connection as described.
·If you connect a device to the AUX connection socket, it will be given priority for
playback. Transmission from the Bluetooth device will be completely interrupted,
and will not resume until you remove the plug from the AUX socket.
and will not resume until you remove the plug from the AUX socket.
·The speaker will automatically connect to the Bluetooth device within 3 seconds after
remove the AUX connection
– provided that the device is nearby and switched on
and Bluetooth is also activated. The indicator light will briefly go off, then blue as
soon as it has found the Bluetooth device.
soon as it has found the Bluetooth device.
·AUX connection will always take precedence over incoming calls and Bluetooth
playback.
Connection priority:
AUX > Incoming calls >Bluetooth
(iPhone is a trademark register by Apple Computer Inc.)
(iPhone is a trademark register by Apple Computer Inc.)
Bluetooth:Playing music & making a phone call
Playing music
The speaker can play music in all current file formats supported by your playback device.
The speaker also supports the new A2DP transmission standard. This standard, which is
supported by most current smartphones, has been specially developed for the wireless
transmission of stereo audio signals via Bluetooth
NOTE: You might need to activate this type of transmission via A2DP manually on your
The speaker can play music in all current file formats supported by your playback device.
The speaker also supports the new A2DP transmission standard. This standard, which is
supported by most current smartphones, has been specially developed for the wireless
transmission of stereo audio signals via Bluetooth
NOTE: You might need to activate this type of transmission via A2DP manually on your
smartphone.
Refer to your smartphone’s operation instructions for more
information about this.
Depending on the smartphone, the speaker might not be able to initiate the start
of music playback. In this case, you should start music playback manually. You
will then be able to pause and resume music playback on each device.
will then be able to pause and resume music playback on each device.
To start music playback
Open the relevant function on your smartphones and start playback.
Open the relevant function on your smartphones and start playback.
Briefly press the Play/Pause button on the speaker.
To pause playback part way through, briefly press the Play/Pause button on the
speaker
To then resume playback, briefly press the Play/Pause button on the speaker again.
Adjusting the Volume