Thermor Ltd. 350TX ユーザーズマニュアル

1. Indoor 

temperature 

2. Outdoor 

temperature 

3.  Recorded daily highest and lowest temperature 

4.  Recorded highest and lowest temperature with date   

5.  ℃/℉ switchable(Fault:℃) 

6.  365 different Canadian weather trivia questions 

7.  English or French language questions display switchable 

8. Time 

9. Calendar 

10. Low battery indicator 

 

1. Insert batteries into the monitor first. 

2. Place the monitor as close as possible next to the remote sensor and insert the batteries into the 

remote sensor. 

3. Position the monitor and remote sensor within effective transmission range, which in usual 

circumstances no more than 50 meters. The range is affected by the building materials and where the 

monitor and remote sensor are positioned; try various locations for the best results.   

 

NOTE: The remote sensor should be placed in a shaded area for accurate readings 

 

Once the remote sensor has been powered up, the monitor will attempt to search for the signal for 3 

minutes. 

 

Once the signal is received, the dashes (- -：-) on the monitor will change to the current outdoor 

temperature. If after 3 minutes the screen does not change to show the outdoor temperature, press 

“RE-SYNC” button in the monitor. The monitor will now attempt to search for the signal for another 3 

minutes. 

 

If monitor doesn’t receive the signal more than 2 minutes, your display shows dashes    (- -：-). Press 

“RE-SYNC” button in the monitor. The monitor will now attempt to search for the signal for another 3 

minutes. 

 

If monitor doesn’t receive the signal more than 60 minutes, the monitor will attempt to search for the 

signal for another 3 minutes automatically. 

If monitor doesn’t receive the signal all the time, the monitor will search for the signal for 3 minutes 

every hour until signal received.