Texas Instruments TSR102 ユーザーズマニュアル

 

 

3DESREADER DEMO Ver. 1.0 

TI Proprietary Information 

1 

5/20/02 

 
Reader Terminal POS Emulator Installation Instructions: 
 
Caution: Any modification or changes to the unit not expressively authorized by the 
party responsible for compliance may void the users authority to operate the 
equipment. 
 
1.  Installation of POS Emulation S/W Program: 3DESREADER POS DEMO 1.0 

 
a.  Install CD into drive. 
b.  From file manager/explorer select file STARTUP.EXE. 
c.  Walk through standard installation process by following prompts. 
d.  Installation is now complete. 
 

2.  Installation of Reader Terminal (Refer to Fig 1) 

 
a.  Plug the RJ-45 side of the RS-232 (via RJ-45) Serial cable into the left-most 

socket of the reader & the DB-9 side of the cable into one of the COM ports of 
your PC (Typically COM 2 port). 

c.  Plug the Power input (RJ-45) into the right-most socket (Red Socket). 
 

 

                          Figure 1 

 

 
3. Starting the 3DESREADER DEMO 1.0 Program 

 
a.  Select the Windows START button and select PROGRAMS from the drop down 

menu. 

b. From PROGRAMS select 3DESREADER DEMO 1.0  
c.  The program will now launch and you will see the screen noted in figure 2. 

RS-232 
input via 
RJ-45

Power Input 
(Red Socket) 

RS-485 
input via 
RJ-45