Bose Corporation 423376 ユーザーズマニュアル

OWNER’S GUIDE

BOSE

™

 Headphones

The BOSEbuild Listen app includes step-by-step 

assembly instructions, as well as activities and tools 

that help you get the most out of your BOSEbuild 

headphones. Once you’ve finished building your 

headphones, refer to this guide for information about 

using the headphones without the Listen app.

Slide the Power/Bluetooth switch forward.

A voice prompt announces the battery level and any 

connected devices. The battery indicator glows 

according to the current charge level. 

Slide the Power/Bluetooth switch back.

1.  Slide the Power/Bluetooth button forward to the     

symbol and hold it for two seconds. You hear 

“Ready to connect” and the Bluetooth light blinks 

blue.

2. On your mobile device, make sure Bluetooth is on. 

(The Bluetooth menu is usually found in the Settings 

menu.) 

3. Select your BOSEbuild headphones from your 

mobile device’s Bluetooth list.

The Bluetooth indicator glows solid white, and the 

voice prompt says, “Connected to <device name>.” 
Note: When powered on, the headphones try to 

reconnect with the two most recently-connected 

devices. The devices must be powered on and within 

range (30 ft. or 9 m).

Your BOSEbuild headphones can remember up to 

eight paired devices and can be actively connected to 

two devices at a time. If you pair a ninth device, the 

least recently used device will be deleted from the 

headphone’s memory. 

When two devices are actively connected, you can play 

music from either device. To switch between 

connected devices, pause the first device and play 

music from the second. 

To play music from a paired device that is not currently 

connected: 

1.  Slide the Power/Bluetooth button forward to the     

symbol and release to hear which device(s) are 

currently connected.

2. Slide the Power/Bluetooth button forward again 

within three seconds to connect to the next paired 

device.

3. Repeat step 2 until you hear the correct device 

name. 

Note: To use this feature, voice prompts must be on.

You can use the Color button on the left earcup to 

change the color of your headphones. Use the 

BOSEbuild Listen app to create your own color 

presets.

1.  Press the Color button to switch between 

color presets.

2. Press and hold the Color button for three 

seconds to turn the LEDs off.

1.  Plug the small end of the USB cable into the 

micro-USB connector on the right earcup. 

2. Plug the other end into a USB wall charger or 

computer that is powered on. 

Note: During charging, the battery light blinks amber. 

When the battery is fully charged, the battery light 

glows green. 

Allow up to two hours to fully charge the headphones. 

Using the colored LED lights draws battery power 

more quickly than music listening alone.
A full charge powers the headphones for up to 15 

hours of music listening, or up to 8 hours of music 

listening with LED lights.
Listening to music at high volume levels or using the 

LEDs at full brightness draws battery power more 

quickly.

Each time you power on the headphones, a voice 

prompt announces the battery level. When the battery 

is nearly depleted, you hear “Battery low, please 

charge now.” 

The Bluetooth and battery indicators are located on 

the right earcup.

Once the headphones are connected, the Bluetooth 

light turns off after 10 seconds. When the headphones 

are powered on, press any button to view the 

Bluetooth status.

When not charging, the battery light turns off after 10 

seconds. When the headphones are powered on, press 

any button to view the battery status.

Note: If the headphones are connected to an Apple 

device, the device displays the headphone battery 

level near the upper right corner of the screen and in 

the notification center. 

Voice prompts guide you through the Bluetooth 

connection process, announce the battery level and 

identify connected devices. You can enable or disable 

voice prompts using the buttons on your headphones. 

Tip: You can also manage voice prompt settings using 

the BOSEbuild Listen app. 

To disable voice prompts, press and hold 

+ and – 

simultaneously until you hear, “voice prompts off.” 

Press and hold 

+ and – again to re-enable voice 

prompts.

Note: Disabling voice prompts does not disable iOS or 

Android voice control.

When connected to an Apple or Android device, press 

and hold      for one second.

You hear a tone that indicates voice control is active. 

Press      again to dismiss voice control.  

To clear the headphone’s memory of all paired 

devices: 

1.  Slide the Power/Bluetooth button forward to the      

symbol and hold it for 10 seconds, until you hear 

“Bluetooth device list cleared.” 

2. Delete the BOSEbuild headphones from your 

mobile device’s Bluetooth list. All Bluetooth devices 

are cleared, and the headphones are ready to pair. 

To restore your headphones to factory default 

settings:

1.  Make sure the headphones are powered on.
2. Press and hold the Color and Volume down buttons 

for 10 seconds until the LEDs flash green.

The headphones reset, the Bluetooth indicator light 

blinks blue, and you hear “Ready to pair.” 

Bluetooth light

Blinking blue 

Ready to connect

Blinking white 

Connecting

Solid white

Connected

Solid green 

Medium to full charge

Blinking amber

Charging

Solid amber 

Low charge

Blinking red

Need to charge 

Solid red 

Charging error - contact 

BOSEbuild customer service

Play/Pause

Press  

Skip Forward

Double-press 

Skip Back

Triple-press 

Fast Forward

Double-press      and hold the second press

Rewind

Triple-press      and hold the third press

Volume Up

Press 

Volume Down

Press

Volume up button

Color button

Volume down button

Multi-function button

Power/Bluetooth switch

Aux connector

Micro USB connector

Indicator lights

Volume up (   )

Multi-function (     ) 

Volume down (   )

Answer or end a call

Press        

Decline an incoming call

Press and hold      for one 

second

Answer a second incoming call 

and put the current call on hold

While on a call, 

press      once

Decline a second incoming call 

and stay on current call

While on a call, press and 

hold      for one second

Switch between two calls 

With two active calls, 

double-press       

Create a conference call 

With two active calls, press 

and hold      for one second

Mute or unmute a call 

While on a call, press 

+ 

and 

– simultaneously