HT Precision Technologies Inc HF2012-TX ユーザーズマニュアル
Important Safety InformatIon
Corsair Vengeance® 2000 Wireless 7.1 Gaming Headset
1. Read these instructions.
2. Keep these instructions.
3. For how to operate and use the product please refer to our
1. Read these instructions.
2. Keep these instructions.
3. For how to operate and use the product please refer to our
Quick Start Guide.
4. Heed all warnings.
5. Follow all instructions.
6. Do not use this apparatus near water.
7. Clean only with dry cloth.
8. Do not block any ventilation openings. Install in accordance with the
5. Follow all instructions.
6. Do not use this apparatus near water.
7. Clean only with dry cloth.
8. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
9. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
10. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A ground-
ing type plug has two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
ing type plug has two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
11. Protect the power cord from being walked on or pinched, particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
apparatus.
12. Only use attachments/accessories specified by the manufacturer.
13. Only use with the cart, stand, tripod, bracket, or table specified by the
13. Only use with the cart, stand, tripod, bracket, or table specified by the
manufacturer or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
when moving the cart/apparatus combination to avoid injury from tip-over.
14. Unplug this apparatus during lightning storms or when unused for long
periods of time.
15. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
16. The apparatus shall not be exposed to dripping or splashing and that no
objects filled with liquids, such as vases, shall be placed on the apparatus.
17. Warning: to reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
18. Caution: these servicing instructions are for use by qualified personnel only.
To reduce the risk of electric shock do not perform any servicing other than
that contained in the operating instructions unless you are qualified to do
so.
that contained in the operating instructions unless you are qualified to do
so.
19. Where the mains plug or an appliance coupler is used as the disconnect
device, the disconnect device shall remain readily operable.
Battery Safety
For products which use a Lithium-ion Polymer Battery (LIPB):
Precautions must be followed in the event that the headset is
Precautions must be followed in the event that the headset is
disassembled for disposal, recycling, refurbishment or repair.
1. Do not drop, hit, or bend the battery.
2. Electrical short circuiting of battery terminals is strictly prohibited,
1. Do not drop, hit, or bend the battery.
2. Electrical short circuiting of battery terminals is strictly prohibited,
as it may damage the battery cell.
Prohibition of disassembly
3. Never disassemble the battery cell.
4. Disassembling of the battery cell might cause an internal short circuit in
3. Never disassemble the battery cell.
4. Disassembling of the battery cell might cause an internal short circuit in
the battery cell, which may cause gassing, explosion, or other dangerous
conditions.
conditions.
5. Battery electrolyte is harmful.
6. LIPB should not have liquid from electrolyte flowing, but in case the
6. LIPB should not have liquid from electrolyte flowing, but in case the
electrolyte comes into contact with the skin or eyes, seek medical help.
Physicians shall flush the electrolyte immediately with fresh water and
medical advice is to be sought.
Physicians shall flush the electrolyte immediately with fresh water and
medical advice is to be sought.
Prohibition of dumping of cells into fire
7. Never incinerate nor dispose the cells in fire. These may cause
7. Never incinerate nor dispose the cells in fire. These may cause
explosion of the cells, which is very dangerous and is prohibited.
Prohibition of cells immersion into liquid such as water
8. The cells shall never be soaked with liquids such as water, seawater, drinks
8. The cells shall never be soaked with liquids such as water, seawater, drinks
such as soft drinks, juices, coffee or others.
Prohibition of use of damaged cells
9. Cells might be damaged during shipping by shock. If any abnormal features
9. Cells might be damaged during shipping by shock. If any abnormal features
are found, such as damages in a plastic envelop of the cell, deformation
of the cell package, smelling of an electrolyte, an electrolyte leakage and
others, the cells must not be used.
of the cell package, smelling of an electrolyte, an electrolyte leakage and
others, the cells must not be used.
10. Cells with an electrolyte smell or a leakage shall be placed away from fire to
avoid firing or explosion.
Caution: Risk of explosion if battery is replaced by an incorrect type.
Vengeance 2000 Headset: For Recycling and Disposal, first remove battery
according to the following diagram.
Always dispose of used battery according to local regulations.
fCC – UnIted StateS and Canada
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other
antenna or transmitter. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications to this equipment. Such modifications could
void the user authority to operate the equipment.
antenna or transmitter. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications to this equipment. Such modifications could
void the user authority to operate the equipment.
FCC ID: A9AHF2012-TX (Dongle)
FCC ID: A9AHF2012-RX (Headset)
Canada (IC) Statements:
This device complies with Industry Canada RSS-210. Operation is subject
to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
FCC ID: A9AHF2012-RX (Headset)
Canada (IC) Statements:
This device complies with Industry Canada RSS-210. Operation is subject
to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Corsair Components, Inc. CA-9011115-NA: HF2012-TX, HF2012-RX
This device complies with RSS-210 of IC rules.
Operation is subject to the following two conditions:
(1) The device may not cause harmful interference, and
(2) This device must accept any interference received including
interference that may cause undesired operation.
IC: 10101A-HF2012-TX (Dongle)
IC: 10101A-HF2012-RX (Headset)
This device complies with RSS-210 of IC rules.
Operation is subject to the following two conditions:
(1) The device may not cause harmful interference, and
(2) This device must accept any interference received including
interference that may cause undesired operation.
IC: 10101A-HF2012-TX (Dongle)
IC: 10101A-HF2012-RX (Headset)
Hereby, Corsair Components, Inc declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive
1999/5/EC.
with the essential requirements and other relevant provisions of Directive
1999/5/EC.
This equipment complies with the European Council Recommendation
of 12 July 1999 on the Limitation of Exposure of the General Public to
Electromagnetic Fields [1999/519/EC].
of 12 July 1999 on the Limitation of Exposure of the General Public to
Electromagnetic Fields [1999/519/EC].
ComplIanCe
This product is in compliance with the essential requirements and
other relevant provisions of Directives 2006/95/EC (Low Voltage)
and 2004/108/EC (EMC).
Important
Read and understand all instructions before you use your Corsair personal
audio product. If damage is caused by failure to follow instructions, the
warranty does not apply.
other relevant provisions of Directives 2006/95/EC (Low Voltage)
and 2004/108/EC (EMC).
Important
Read and understand all instructions before you use your Corsair personal
audio product. If damage is caused by failure to follow instructions, the
warranty does not apply.
Safety
Risk of electric shock or fire!
• Never expose the product and accessories to rain or water. Never place
Risk of electric shock or fire!
• Never expose the product and accessories to rain or water. Never place
liquid containers, such as vases, near the product. If liquids are spilt on or
into the product, disconnect it from the power socket immediately. Contact
Corsair Customer Service to have the product checked before use.
into the product, disconnect it from the power socket immediately. Contact
Corsair Customer Service to have the product checked before use.
• Never place the product near naked flames or other heat sources,
including direct sunlight.
• Never insert objects into openings on the product.
• Where the mains plug or an appliance coupler is used as the disconnect
• Where the mains plug or an appliance coupler is used as the disconnect
device, the disconnect device shall remain readily operable.
• Disconnect the product from the power socket before lightning storms.
• When you disconnect the power cord, always pull the plug,
• When you disconnect the power cord, always pull the plug,
never the cord.
Risk of short circuit or fire!
• Before you connect the product to a power socket, ensure that the power
• Before you connect the product to a power socket, ensure that the power
voltage matches the value printed on the back or bottom of the product.
Never connect the product to a power socket if the voltage is different.
Never connect the product to a power socket if the voltage is different.
• Never place the product or any objects on power cords or on other electri-
cal equipment.
• If the product is transported in temperatures below 5° C, unpack the
product and wait until its temperature matches room temperature before
connecting it to a power socket.
connecting it to a power socket.
Risk of overheating!
• Never install this product in a confined space. Always leave a space of at
• Never install this product in a confined space. Always leave a space of at
least four inches around the product for ventilation. Ensure curtains or
other objects never cover the product.
other objects never cover the product.
xxx
xxx
xxxxxxx
xxxxxxx
RXXXXX
HHHH AA FFF
-
-
HHHH AA FFF
-
-
RXXXXXXXXXX
RXXXXXXXXXX
HUXXXXX XXXXX
-
RXXXXXXXXXX
RXXXXXXXXXX
RXXXXX
HUxxxxx–xxxxx
xxx
xxx
xxxxxxx
xxxxxxx
RXXXXX
HHHH AA FFF
-
-
HHHH AA FFF
-
-
RXXXXXXXXXX
RXXXXXXXXXX
HUXXXXX XXXXX
-
RXXXXXXXXXX
RXXXXXXXXXX
RXXXXX
HUxxxxx–xxxxx
1.
2.
3.
4.
5.
Veng_2000_SL.indd 2-3
3/29/12 3:28 PM