Motorola Solutions Inc. 99FT7011 ユーザーズマニュアル
32
Important Safety Information
Battery Charger
•
To reduce risk of injury, charge only rechargeable Motorola
authorized batteries. Other batteries may explode, causing
personal injury and damage.
authorized batteries. Other batteries may explode, causing
personal injury and damage.
•
Use of accessories not recommended by Motorola may
result in risk of fire, electric shock, or injury.
result in risk of fire, electric shock, or injury.
•
To reduce the risk of damage to the electric plug and cord,
pull by the plug rather than the cord when disconnecting the
charger.
pull by the plug rather than the cord when disconnecting the
charger.
•
An extension cord should not be used unless absolutely
necessary. Use of an improper extension cord could result
in risk of fire and electric shock. If an extension cord must
be used, make sure that the cord size is 18AWG for lengths
up to 15 feet (4.62mm).
necessary. Use of an improper extension cord could result
in risk of fire and electric shock. If an extension cord must
be used, make sure that the cord size is 18AWG for lengths
up to 15 feet (4.62mm).
•
To reduce risk of fire, electric shock, or injury, do not oper-
ate the charger if it has been broken or damaged in any
way. Take it to a qualified Motorola service representative.
ate the charger if it has been broken or damaged in any
way. Take it to a qualified Motorola service representative.
•
Do not disassemble the charger; it is not repairable and
replacement parts are not available. Disassembly of the
charger may result in risk of electrical shock or fire.
replacement parts are not available. Disassembly of the
charger may result in risk of electrical shock or fire.
•
To reduce risk of electric shock, unplug the charger from the
ac outlet before attempting any maintenance or cleaning.
ac outlet before attempting any maintenance or cleaning.
•
This equipment is not suitable for outdoor use. Use only in
dry locations/conditions.
dry locations/conditions.
•
Connect equipment only to an appropriately fused and wired
supply of the correct voltage (as specified on the product).
supply of the correct voltage (as specified on the product).
•
When not in use, disconnect the transformer from the ac outlet.
•
The socket outlet to which the transformer is connected
should be close by and easily accessible.
should be close by and easily accessible.
•
In equipment using fuses, replacements must comply with
the type and rating specified in the equipment instructions.
the type and rating specified in the equipment instructions.
•
Maximum ambient temperature around the transformer unit
must not exceed 40˚C (104˚F).
must not exceed 40˚C (104˚F).
•
Output power from the transformer unit must not exceed the
ratings stated on the product label located on the bottom of
the charger.
ratings stated on the product label located on the bottom of
the charger.
•
Make sure the cord is located where it will not be stepped
on, tripped over, or subjected to water, damage, or stress.
on, tripped over, or subjected to water, damage, or stress.